Repair kit BGM PRO for the primary reduction of BGM PRO with straight-toothed primary gear (62/63 teeth) for Vespa Wideframe engines, e.g. Vespa VM, VN, VL, VB, VNA, VNB, VBA. The springs contained in the large primary gear serve as shock absorbers. They protect the gear unit from high load peaks. If they are too soft in relation to the engine torque, they are completely [...]

A well-functioning electronic ignition is heavily dependent on whether the trigger surfaces of the pole wheel are precisely aligned with the induction lugs of the pickup on the ignition base plate. Due to the addition of manufacturer tolerances (e.g. different cone angle, different construction heights) it can happen that this alignment is no longer given. This steel plate set can be an inexpensive and quick solution. In order to [...]

For permanent fixation, stickers need a clean, smooth and degreased surface. Our brake cleaner, for example, is very suitable for degreasing. In the case of larger areas to be glued, it is always an advantage to spray the area with a little water before gluing. The water can also be mixed with a few drops of detergent to make it [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]

bgm - Item number: BGM9311Z Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Frame> Seat> Retaining plate Other customers who are interested in seat retaining plate / striking plate -BGM ORIGINAL- Vespa PK50 XL2, PK125 XL2, also looked for: Seat bracket | Striking plate | Bench plate | Seat bracket | Retaining pin [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

Should be replaced with every exhaust change to be on the safe side. Otherwise, false air can be drawn through the outlet and there is a risk of cylinder damage. bgm - Item number: 8006001 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Gaskets Other customers who are interested in Gasket exhaust -BGM [...]

Cylinder base gasket -BGM PRO- 1,5mm Pinasco 177ccm bgm - item number: 3820040 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Pinasco 177 ccm- Vespa PX80, PX125, PX150 - 1.5mm, also looked for: [...]

bgm - Item number: BGM6606BL18 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electronics> Turn signals Other customers who are looking for cable adapter kit, rear turn signal conversion -BGM PRO- Vespa GTS125-300 (model years -2018) - interested in using Moto Nostra LED indicators with dynamic LED running lights, searched [...]

Cover plate to close the opening for the electric starter in the air duct of the motor housing of the PX, T5 and Cosa models. Useful if the electric starter is removed or is not available. This means that no valuable cooling air is lost. bgm - item number: 7671454 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

Large upgrade kit for the primary translation of all PV125, ET3, PK80-125 S / XL / XL2 engines (can also be used in 50cc engines if a primary one with shock absorbers / springs is installed there). Consists of: CNC BGM Pro clutch basket (nitrided) CNC BGM Pro cover plate (nitrided) screw connection The set massively reinforces the primary drive and thus makes it durable for powerful engines. [...]