A well-functioning electronic ignition is heavily dependent on whether the trigger surfaces of the pole wheel are exactly aligned with the induction lugs of the pickup on the ignition base plate. Due to the addition of manufacturer tolerances (e.g. different cone angles, different construction heights) it can happen that this alignment is no longer given. This steel plate set can be an inexpensive and quick solution. This means that the pick-up can be raised by a total of 0,5 mm in 1,5 mm steps, and the ignition pulse is transmitted cleanly to the CDI again. If, for example, the engine does not start after being converted to an electronic ignition, this can be the solution to the problem.
- bgm - item number: BGM8000S05
- Availability: in stock (Please check availability here in Scooter Center Shop)
- Weight: approx. 0,00 kg
- Category: Engine> ignition> pickups
Other customers interested in spacers for pick-up (height correction) -BGM ORIGINAL- Vespa PX, PK XL, Cosa, Lambretta (e-ignition) - 3x 0,5mm also looked for: Pickup | Ignition signal | Ignition point | Ignition coil | Ignition coil | Igniter | Trigger | Impulse | Inductive | Ignition pickup | Hall sender | Hall | Encoder | Hall | Encoder | Ot | Otgeber | Encoder | Zzp | Ignition timing | Preignition | Stuttering | Stutters | Ignition problems | Pick | Up | Pick | Up | Engine stutter | Misfire | Ignition problems | Dropouts | Ignition defect | Capteur |