Carburetor kits specially put together for the RaceTour Lambretta cylinders. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with an MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or [...]

Carburetor kit especially for the BGM RT Lambretta cylinder. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with an MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or bgm [...]

Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI26 / 26 E Dell'Orto / Spaco carburetor. With a diameter of 25mm, these already have significantly more area than a SI24 carburettor. In principle, this type of carburetor can be drilled out further, but then the guidance of the throttle valve and its sealing function are no longer 100% guaranteed. Therefore we restrict [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI26 / 26 E Dell'Orto / Spaco carburetor. With a diameter of 25mm, these already have significantly more area than a SI24 carburettor. In principle, this type of carburetor can be drilled out further, but then the guidance of the throttle valve and its sealing function are no longer 100% guaranteed. Therefore we restrict [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI24 / 24 E Dell'Orto / Spaco carburetor. This will be revised by us so that it also meets the high demands of a heavily modified engine. In order to meet the increased fuel consumption of a tuned engine, the carburettor was optimized and a modification was made to the through-hole between the shimmer chamber and the nozzle holder.

The BGM FASTER FLOW SI carburetor is based on a brand new SI24 / 24 E Dell'Orto / Spaco carburetor. This will be revised by us so that it also meets the high demands of a heavily modified engine. In order to meet the increased fuel consumption of a tuned engine, the carburettor was optimized and a modification was made to the through-hole between the shimmer chamber and the nozzle holder.

bgm PRO air filter box for the Lambretta series 1-3. The starting point is a SIL air filter box. A connection piece to the frame with a diameter of 50 mm is hard-soldered into this. The diameter of the airbox corresponds to that of the frame. The box and the air filter connector are powder-coated in white. All additional work has been carried out on site in Cologne. Included [...]

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]

de German
X
Privacy
We, Scooter Center GmbH (head office: Germany), process personal data to operate this website only to the extent that is technically necessary. All details can be found in our data protection declaration.
Privacy
We, Scooter Center GmbH (head office: Germany), process personal data to operate this website only to the extent that is technically necessary. All details can be found in our data protection declaration.