With this ball bearing and needle bearing pull-out set, the screwdriver has all the options for careful bearing dismantling! The set contains the optimally suitable extractor for most bearing inner diameters. The respective extraction expanding mandrel is inserted into the bearing to be dismantled, tightened with the supplied expansion screw and then the area around the bearing is evenly opened with an open flame or hot

Dismantling tool set for ball bearing crankshaft -BGM- Ø = 35-75mm including 2 cutting blades and extension bgm - Item number: 7671376 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Tools Other customers who are interested in dismantling tool set for crankshaft ball bearings -BGM- Ø = 35-75mm also looked for: dismantling tool | Set [...]

Ingenious extension for the BGM PRO maneuvering aid for all classic Vespa and Lambretta scooters. With the addition for the rear wheel, the vehicle can be turned on the spot. So the scooter can be stowed well and safely even in the smallest corner and easily taken out again. The whole thing without any effort. Extension set for article no .: [...]

Precision measuring tool for determining the top dead center and the ignition point. The suitable holder for mounting in place of the cylinder head is included. bgm - Item number: 8099009 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,41 kg Category: Workshop requirements> Tools Other customers who are interested in dial gauge -BGM ORIGINAL- Universal 0,01-10mm - [...]

bgm - Item number: BGM6473 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Workshop requirements> Tools Other customers who are interested in crimping pliers with ratchet function -BGM PRO- for end caps cable Outer shell Ø = 4mm, Ø = 5mm, Ø = 6mm are interested, also looked for: Crimping pliers | Crimping tool | Ferrules | Cable lug | Pliers | [...]

Tool for the exact determination of the top dead center. bgm - Item number: 7670937 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,60 kg Category: Workshop requirements> Tools Other customers who are interested in dial gauge -BGM ORIGINAL- Universal 0,01-10mm - interested without holder, also looked for: dial gauge | Ignition timing | Preignition | Zzp [...]

Allen key especially for the clamping nipples / screw nipples of the clutch and shift cables of all Lambretta models of the LI family. Also available individually. bgm - Item number: BGM6466TLX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop supplies> Tools Other customers who are interested in Allen key -BGM PRO- 3.5mm- 10 pieces [ ...]

Anodized graduated disk to determine the timing of all 2 strokes that have a crankshaft with a 10 or 12 mm thread. This applies to all Lambretta, Vespa and automatic systems, regardless of whether they are 50-80 cc or Maxi engines. All milling work on the cylinder ducts influence the control times, ie how long the ducts are open and thus the [...]

Clever tool from BGM for the damage-free installation of studs. Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. It is braced with the thread of the stud bolt. Now turn the outer wrench flat. The stud bolt is fixed and is loosened or screwed in. Pay attention to a sufficiently firm counter-locking so that [...]

Mocking tool for all cast cylinders with a bore of 32-89 mm. The ideal tool to remove tracks quickly and with on-board resources. Even a cordless screwdriver is sufficient. Move the honing tool evenly and slowly up and down in the cylinder and a beautiful cross-cut decorates the cylinder liner in no time. If the piston has also noticed something, you can carefully [...]

Dial gauge holder to be able to determine the exact top dead center of the piston. Very important to be able to adjust the ignition point precisely. To do this, the cylinder head is removed and our dial gauge holder is placed across the piston and fixed with the cylinder head nuts. The holder can be mounted on all engines whose stud bolt spacing (seen across the piston) has a hole punch.

The right tool for perfectionists when adjusting the carburetor. With this useful tool, the actual nozzle size can be determined in no time at all. bgm - Item number: 1800026 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Workshop requirements> Tools Other customers who are interested in nozzle measuring gauge -UNIVERSAL- Ø = 0,45-1,50 , XNUMXmm are interested, searched [...]

de German
X
Privacy
We, Scooter Center GmbH (head office: Germany), process personal data to operate this website only to the extent that is technically necessary. All details can be found in our data protection declaration.
Privacy
We, Scooter Center GmbH (head office: Germany), process personal data to operate this website only to the extent that is technically necessary. All details can be found in our data protection declaration.