Good tool = good result This is what the tool made in Germany for dismantling / assembling the Lambretta Motor silent blocks stands for. This means that replacing the rubber dampers, which are important for a low-vibration Lambretta, is not only done quickly but also precisely. In contrast to the previously available Indian tools, the BGM PRO tooling has been supplemented by many fine details: [...]
Special tool for assembling the primary drive in Vespa smallframe engines GENTLE ASSEMBLY With the primary wheel pulling tool from bgm, the large primary wheel is gently drawn into the bearing seat. The bushing of the assembly aid is supported on the inner ring of the bearing. Therefore, no pressure is transferred to the sensitive bearing surfaces, balls and the motor housing during assembly. The [...]
Nozzle reamer set 12 pieces for mechanical expansion of the nozzle bore. 0,6 - 1,9mm bgm - Item number: 1800017 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Tools> Tools Other customers who are interested in nozzle reamer Set -UNIVERSAL Ø = 0,6-1,9mm- 12 pieces, also looked for: Nozzle reamer | Teaching | Nozzle size [...]
Professional oil filter wrench that makes the dismantling / assembly of the oil filter cartridge much easier and safer. The tool encompasses the filter cartridge and offers a secure hold. Slipping, as with tools from other manufacturers, is reliably prevented. Heavy workshop quality No more slipping possible, even with great effort, safe to use Galvanized For 1/2 inch drive (large ratchet) bgm - item number: [...]
The bgm multitool tool bgm8819 contains three tools in one: Pole wheel puller (M28x1 external thread) Clutch puller (M26x1 internal thread) Clutch compressor The pole wheel puller (M28x1) fits all Vespa with electronic ignition (exception Vespa Rally200 Femsatronic and PK automatic), including our ignitions for retrofitting the Vespa Sprint / VBB and V50 / Primavera as well as the Malossi VesPower ignitions. Also suitable is this [...]
The BGM Superstrong for Lambretta already has a "built-in" clutch compressor system. The Superstrong coupling can be easily compressed with just two screws and long nuts. On the face of the coupling spider, two of the legs are marked with a point, at the bottom of which is the threaded hole for the screw. Here the screws are used for pre-tensioning [...]
Indispensable tool for anyone who wants to screw on their engine. The front belt pulley is blocked by the teeth. The method is much gentler than using a piston stopper. The crank drive is treated with much more care. bgm - Item number: BU5430 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,16 kg [...]
Super practical helper if the clutch needs to be changed when the vehicle is stationary. bgm - Item number: 8099015 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Motor> Tools> Tools Other customers who are interested in clutch centering aid -LAMBRETTA- LI, LIS, SX, TV (series 2-3) are interested, searched [...]
Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Used to mount the ball bearing type 6204 on the crankshaft of the Vespa Smallframe models. The tool supports itself [...]
bgm - Item number: BGM7908TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in punch assembly tool for installation of ball bearing auxiliary shaft 6302 -BGM PRO- Vespa PX200, Rally180, Rally200, COSA200, T5 125cc, GS150 / GS3, Hoffmann, T1, T2, T3, GL [...]
Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Is used to mount the split roller bearing of the main shaft in the small engine half (Lima side). Material: 42CroMo4 (1100Nmm² tensile strength!) Surface: blue galvanized [...]
bgm - Item number: BGM2109TU Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Motor> Tools> Tools Other customers who are interested in flywheel holder -BGM PRO Electronics- Lambretta LI, LIS, SX, TV, GP, DL - Motorbozen 21,5cm + 29cm are of interest, also searched for: pole wheel holder | Holder [...]
