bgm - Item number: BGM4750G Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in Bougie pipe -UNIVERSAL Ø = 8mm- 5m - gray , also searched for: Bougierohr | Heat shrink tubing | Insulating tube | Electrics | Management | Wiring harness | Cable hose | Cable harness hose [...]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in Rally, Sprint, VBB, Super, VNA, VNB, etc. The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more permanent and safer on the road. The non-contact CDI ignitions are almost indestructible and reliable, as is the light output with a modern, regulator-supported on-board electrical system.

The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets. Regulated direct current output for the horn (12V DC) 12V USB charging output with up to 3A charging power 12V flasher relay [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM original suction hose - E10 resistant - for Vespa Largeframe PX, T5, LML 2-stroke The BGM original suction hose has only the best properties: E10 resistant, durable, solid rubber, dimensionally stable The base material is a high-quality elastomer which remains permanently elastic and does not tear. The BGM original suction hose is used between the frame and the air filter box. Due to the fixed [...]

Indicator update for Vespa GTS models built before 2014! THE DESIRE The Vespa GTS models from 2014 already have an LED daytime running light which is integrated in the indicators. These indicators also fit in all previous years of the GT / GTS / GTL series. THE PROBLEM The wiring is not, however, due to the different plug types used at the factory.

Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]

Air jet set specific for the Dell'Orto carburetor SI24 / 24G (e.g. Vespa T5). The carburettors specified with the ending 'G' have a lower overall height than those with the suffix 'E' or 'D'. For this reason, shorter auxiliary and air jets are used in the 'G' carburettor types. The T5 models almost exclusively have an air jet of size 120 ex works.

Cylinder base gasket -BGM PRO- 1,5mm Pinasco 213ccm bgm - item number: 3820043 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who Interested in spacer cylinder base -BGM ORIGINAL Pinasco 213 ccm / Piaggio 200 ccm- Vespa PX200, Rally200 - 1.5mm, also searched [...]

bgm - Item number: SC4011 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Rubber parts> Seals Other customers who are interested in sealing fuel tap inside -BGM ORIGINAL 26x4mm- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass [...]

bgm - Item number: 4350032 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -Ø = 1,2mm x 2500mm, sleeve = 2200mm, nipple Ø = 3,0mm x 3mm - used as throttle cable - braided PE - gray are of interest, also looked for: [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]