The main shaft of the GS 160 and SS 180 is held by such a castle nut. Wedi seat 40mm. bgm - Item number: BGM5440 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are interested in castle nut rear wheel bearing- BGM Original -VESPA Øi = 40mm, [...]
bgm - Item number: BGM4940 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are looking for castle nut rear wheel bearing- BGM original- VESPA Øi = 40mm, Øa = 49mm, teeth = 9- Vespa Super 125 (VNC1T), Super 150 (VNB1T -153261), for front wheel bearings Vespa GS160 (VSB1T, VSB2T), SS180 [...]
Castle nut for: Rear wheel bearings: Vespa 125 - VNA, VNB, GT125 (up to 78300), GTR125 (up to 124013) Vespa 150 - VBA, VBB, VGLA, VGLB, GL150, Sprint (up to No. 1170239), Sprint Veloce (up to No. 169300) Front wheel bearing: Vespa 160GS, 180SS Ø outside: 49mm Ø inside (shaft seal seat): 37mm slots: 9pcs. Height: 12,5mm Suitable tool - article no. 1800018 bgm - Item number: BGM4937 [...]
bgm - Item number: BGM7929TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Tools Other customers who are interested in castellated wrenches clutch nut -BGM ORIGINAL- Vespa Largeframe ( up to 1995), also searched for: Crown nut wrench | Coupling nut | Crown nut wrench | Clutch tool | Wrench | [...]
bgm - Item number: BGM809GST Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Engine> Clutch> Tools Other customers who are interested in clutch wrenches for lock nut / locknut -BGM ORIGINAL- Vespa GS150 / GS3, GS160, SS180, Ø = 33,5mm, Attention: You are interested in left-hand thread, you also looked for: Slotted nut | Tool | Coupling tool [...]
Very high quality special nut, made in Germany, for all Vespa engines with the clutch on the crankshaft built before 1990, which originally have a so-called castle nut. So therefore suitable for all vehicles built from 1950 onwards, such as V1-V5, VNB, VNA, GS150, GS160, Sprint, Rally, GT, GTR, T5, Cosa1, PX, PE etc ... These in Germany [...]
Extra hard coupling nut, made in Germany, for use with very heavily loaded drives, for example in racing. Of course, it can also be used as a high-quality replacement for the original nut in a standard engine. This very high quality special nut is suitable for all Vespa engines whose clutch sits on the auxiliary shaft (Smallframe: V50, PV, ET3, PK, PK XL, [...]
bgm - Item number: BGM01700N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Coupling> Nuts Other customers who are interested in M10 x1.00 (fine thread) SW = 16 half height -BGM PRO- (used as clutch nut Vespa for auxiliary shaft BGM PRO for V50, PV125, ET3, PK S, PK [...]
