Carburetor components
Please note: Piaggio 50-80ccm automatic vehicles (not PK automatic) generally use PHVA carburettors. The Hyper2 motors (from around 2001) use their own float chamber. This has a drain with hose and a drain plug. These carburettors require the float chamber with item number 1484704. NOTE: If it drips out of the hose, it is not the screw that is leaking, but the [...]
Open intake manifold for Minarellis with upright cylinder Intake manifold with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values and freer turning and thus higher top speed. bgm - Article number: A201 Availability: on [...]
Open intake manifold for Minarellis with horizontal cylinder Intake manifold with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). The result is better acceleration values and freer turning and thus higher top speed. Very subtle, since the original airbox [...]
Carburetor components
7900069 Mixture adjustment screw -BGM PRO- Dellorto PHBH, PHBL
bgm - Item number: 7900069 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM PRO- Dellorto PHBH , PHBL are also interested in: Mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller | Co2 | Co | Co [...]
Carburetor components
7900056 Mixture adjustment screw -BGM PRO for PWK- (bgm, Stage 6, Keihin), PWM38
bgm - Item number: 7900056 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburettor> Carburettor components Other customers who are interested in mixture adjustment screw -BGM PRO for PWK- (bgm, Stage 6, Keihin), PWM38, also looked for: mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller | Co2 [...]
Carburetor components
7900055 Mixture adjustment screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38
bgm - Item number: 7900055 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM PRO- Mikuni TM 24, TMX 32, TMX 35, TMX 38 were also looking for: mixture adjustment screw | Adjusting screw | Carburetor screw | Propeller [...]
Carburetor needles
Contains the most useful needles for tuning the PWK series from 21-30mm Kyajet - PWK tuning tool (click) bgm - item number: 2599134 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor needles Other customers who were interested in needle set -BGM PRO- suitable for [...]
Carburetor components
Conversion set to cable choke so that the choke can be conveniently operated remotely from the handlebar or chassis. Contains the components for the carburetor. If not already available, complete this set with a corresponding choke lever and cable (see accessories). Suitable for flat slide carburetors from Mikuni (TMX30, TMX32), Keihin PWK28 and Polini carburettors, as well as many OKO, Koso and Stage 6 [...]
Carburetor components
Set screw BGM PRO Vespa Largeframe for fastening carburetor SI20 / SI24 / SI26 New type of screw from BGM PRO with practical hexagon head Replaces the conventional hexagon socket screw for fastening the carburetor of Vespa PX models from 1984 (PX Lusso, My, 2011, Cosa) Also fits for fastening a Malossi / Polini / Pinasco rotary valve intake manifold Can also be used as a replacement for the stud bolts / nuts for fastening the carburetor of the earlier Vespa Largeframe [...]
0 bgm - Item number: 7673412 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Carburettor> Diaphragm plates Other customers who are interested in membrane plates -BGM PRO- type Yamaha RD350 YPVS - GRP platelets are of interest, also searched for: Membrane platelets | Membrane plate | Flutter valve | Membrane plates | Diaphragm block plate [...]
Carburetor components
7673420 Mixture adjustment- idle screw set -DellOrto PHVA carburetor- Piaggio 50 cc 2-stroke
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHVA series is mainly used on vehicles with a Piaggio engine bgm - item number: 7673420 Availability: in stock (Please check [...]
Carburetor components
7673418 Mixture adjustment, idle screw set -BGM ORIGINAL M4 for BGM KWP carburettor (24mm - 26mm)
Adjustment screw set, suitable for the derivatives of the Keihin PWK carburetors with small body (24mm - 26mm - 28mm - 30mm) from Stage6, Motoforce, Koso, OKO, etc. Contains both the air screw and the idle screw. Incl. the springs and O-rings / seals behind it. Attention: The idle screw of this set has an M4 thread, therefore not suitable for original [...]
