Mixture adjustment screw BGM PRO for converting Dell'Orto SI carburettors with long hexagon mixture adjustment screw to short slotted screw The BGM PRO conversion mixture adjustment screw is used to use carburettors with long hexagon mixture adjustment screws in older engines (with studs for mounting the carburetor). It replaces the (too) long adjusting screw and enables the carburettor to be dismantled and assembled without any problems. Due to the shorter [...]
Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]
Float carburetor
Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]
Float carburetor
Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]
Handy tool to carry out all work on the PWK carburettors quickly and efficiently. So adjusting the carburetor is a big part of the horror. bgm - Item number: 2599105 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Carburettor> Tools Other customers who are [...]
Carburetor components
7673422 Mixture adjustment- idle screw set -DellOrto PHBN carburetor- Minarelli 50 ccm electrochoke)
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHBN series is mainly used on vehicles with Minarelli engines bgm - item number: 7673422 Availability: in stock (Please check [...]
Carburetor components
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburetors with manual choke control. The PHBN series is mainly used on vehicles with a Minarelli engine bgm - item number: 7673421 Availability: in stock (Please check availability here [...]
Air filter fleece BGM PRO for Vespa Smallframe V50, 50N, PV, ET3 High quality filter fleece from Marchald (Italy), manufactured for BGM PRO. Suitable for all smallframe motors with sheet metal air filter box. 1: 1 replacement for the original wire mesh. Significantly better and finer filtering. Protects the engine as no fragments of the old wire mesh can be sucked in. Also ideal for performance-enhanced engines with increased [...]
Carburetor components
BGM8507 Mixture adjustment screw -BGM for PWK- (bgm, Stage 6, Keihin)
Mixture adjustment screw without spring for bgm PWK, Keihin PWK and Stage6 PWK carburetors bgm - item number: BGM8507 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Carburetor> Carburetor components Other customers who are interested in mixture adjustment screw -BGM for PWK- (bgm, Stage 6, Keihin) were also looking for [...]
bgm - Item number: 708090 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburettor> Sockets Other customers who are interested in vacuum connection -BGM ORIGINAL- M6 (SW = 8, with O-ring, Ø inside = 3,5mm, Ø outside = 6,1mm, length = 30mm), also looked for: vacuum connection | [...]
bgm - Item number: SC2301 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetor -DELLORTO 20 / 20mm SHB- Vespa PK125 XL2, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber | [...]
bgm - Item number: SC2302 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetors -DELLORTO 16 / 15mm, 16 / 16mm SHB- Vespa PK50 XL2 are interested, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber [...]
