Cracked! A pull rope can digest incredibly large loads. The tear limit of the trains we offer is several tons of pulling force. In a pinch you can even tow cars with it. Why a train breaks anyway depends on the fact that it is loaded incorrectly. Zugkiller No. 1 is the so-called common cast ridge. The brake-clutch levers are often [...]
Should be replaced with every exhaust change to be on the safe side. Otherwise, false air can be drawn through the outlet and there is a risk of cylinder damage. bgm - Item number: 8080038 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Gaskets Other customers who are interested in gasket exhaust / cylinder -BGM [.. .]
bgm - Item number: BGM6485 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Brakes> Cables Other customers who are interested in ton brake cable Ø = 12x17mm -BGM ORIGINAL- Vespa front PK, PX (1984-1998), PK / PX rear for conversion, T5 125ccm, ET2, ET4, LX, LXV, S, Sprint 4T, Primavera [...]
bgm - Item number: 3332368 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug - flat receptacle 90 ° angle 6,3mm Ø = 0,75-1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | [...]
bgm - Item number: 3330401 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug ring eyelet 6,5mm Ø = 1,0 -1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | Round connector | [...]
Stud BGM Original for the gear lever / crankcase of the Vespa 80-200ccm largeframe engines. Made of high tensile strength steel with a rolled (rolled) thread. In contrast to a cut thread, the surface is firmer and the thread flanks are press polished. This results in a highly resilient and permanently durable thread. Tightening torque M7: 13-18Nm Scope of delivery: 6x stud bolts M7x50mm bgm - Article number: BGM2750S Availability: [...]
Screw for attaching the luggage compartment / glove compartment to the frame. Is inserted from the fender side below the cascade through the holes in the main frame and countered on the back. TIP: The PX models use a total of 4 screws. The older models such as Rally, Sprint etc. only use this type of screw for the lower fastening straps, ie here only 2 [...]
bgm - Item number: BGM6484 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Brakes> Nuts Other customers who are interested in knurled nut brake cable -BGM ORIGINAL M6 x 1,0, 10mm, SW5- brake cable front Vespa PK, brake cable rear Vespa T125 XNUMXccm, conversion Vespa PX are interested, also looked [...]
bgm - Item number: 10010 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Seals> Seals Other customers who are interested in sealing intake manifold, membrane -BGM ORIGINAL- Minarelli 50 ccm (horizontal) are also interested in: Seal | Intake manifold | Membrane | Gasket intake manifold / membrane | Membrane seal [...]
Spring
BGM1125PKSP exhaust spring -BGM ORIGINAL- 50mm - used for exhaust BGM PRO BigBpx Touring PK 50-125
bgm - Item number: BGM1125PKSP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- 50mm - used for BGM PRO BigBpx Touring PK 50-125 exhaust, also searched for: exhaust spring | Spring | Exhaust bracket [...]
A well-functioning electronic ignition is heavily dependent on whether the trigger surfaces of the pole wheel are precisely aligned with the induction lugs of the pickup on the ignition base plate. Due to the addition of manufacturer tolerances (e.g. different cone angle, different construction heights) it can happen that this alignment is no longer given. This steel plate set can be an inexpensive and quick solution. In order to [...]
We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]
