PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

Shock absorbers from the BGM PRO SC series are THE coilover kit for Vespa with TÜV! The chassis developed by BGM in Germany is available with an ABE for almost all Vespa scooters. The shock absorbers are fully adjustable and offer an incomparable driving experience that was previously unknown on a scooter. with ABE individually [...]

bgm - Item number: 8899001 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Gearbox> U-washers Other customers who are interested in plate pressure plate set chain tensioner -BGM ORIGINAL- Lambretta Series 1-3 are also interested in: Plate | Pressure plate set | Chain tensioner | Plate | Chain tension | Preload [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM1770BS15 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are looking for Spacer cylinder base -BGM ORIGINAL 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1,5mm interested, searched [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

The bgm Pro coupling socket is another innovation in the field of Vespa coupling technology. A high-quality, special material always ensures optimal sliding behavior. The socket allows the clutch to be separated very cleanly, and the start-up behavior is optimized. The result is a clean coupling without judder, even with very powerful engines. The socket is made by bgm [...]

Open intake manifold for all Piaggio scooters with 2-stroke engine housing (50cc, 125cc, 180cc). The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher top speed! Due to the changed installation position of the carburetor, the original connection hose to the air filter box can no longer be used. With a Ø30mm connection width, [...]

Our tuning fan wheel not only looks good, it also cools your engine better. This makes it ideal for tuned engines. Of course, it also looks great on standard engines. The bgm PRO Racing is also lighter than the series part. Due to the lower centrifugal mass, the engines hang more poisonously on the gas and can turn further. Technique tip: [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

Conversion brake arm including brake cam for easy conversion of the rear brake cable to modern thread technology. This means that the old type can be retired with a brake cable safety device simply by clamping. The new technology allows quick and safe adjustment using a knurled nut. Also ideal in racing when the engine is changed frequently or the brake needs to be readjusted quickly. [...]

Complete set of 4 with colored indicator glasses. This is how you skillfully set highlights on your scooter. bgm - Item number: BGM5096 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,35 kg Category: Frame> Electronics> Indicator glasses Other customers who are interested in indicator glasses -BGM ORIGINAL set of 4- Aprilia SR 50 R [...]