BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

This practical bgm Pro dosing bottle fulfills two tasks: on the one hand, it serves as a storage container for amounts of up to 1000ml and at the same time, small amounts can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower bottle body and has graduation marks in 10 ml increments up to 60 ml.

The BGM FASTER FLOW SI carburetor is based on a brand new SI24 / 24 E Dell'Orto / Spaco carburetor. This will be revised by us so that it also meets the high demands of a heavily modified engine. In order to meet the increased fuel consumption of a tuned engine, the carburettor was optimized and a modification was made to the through-hole between the shimmer chamber and the nozzle holder.

This allows the piston to be blocked. Is often used to adjust the ignition with the reversal measurement method. bgm - Item number: BU4932 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Tools> Tools Other customers who are interested in piston stoppers -M10 x 1,25- ( Type NGK C-candle), searched [...]

Premium quality! The side panel rubber of the PX series differs in the thickness of the rubber profile. Basically interchangeable, the so-called PX Lusso model series (from year of construction 1984) uses significantly thicker rubber side panels. Their profile covers more area, both on the side panel and on the frame. Since there are no side panel rubbers in decent quality at a reasonable price on [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

Repair and upgrade kit for the primary gear reduction of all Vespa Wideframe engines, e.g. Vespa VM, VN, VL, VB, VNA, VNB, VBA. The springs contained in the large primary gear serve as shock absorbers. They protect the gear unit from high load peaks. If they are too soft in relation to the engine torque, they are completely compressed and give the unfiltered peak pressures to the gearbox.

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

bgm - Item number: BGM7916 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Clutch> Ball bearings Other customers who wanted needle roller bearings -BK 0712- (07x14x12mm) - BGM ORIGINAL- (used for clutch shaft / clutch cover Vespa V50 (from 1978), PV125 (from 1978), ET3 (from 1978), PK [...]

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

bgm - Item number: BGM8010NA Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutch cover plates Other customers who are interested in clutch cover plate -BGM PRO Superstrong- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP interested, also searched for: clutch cover plate | Cover disk | Cover plate | [...]