Perfect for building your own wiring harness. bgm - Item number: BGM4751 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Workshop requirements> Electronics Other customers who are interested in Bougie pipe -UNIVERSAL Ø = 10mm- 5m - black , also searched for: Bougierohr | Heat shrink tubing | Insulating tube | [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with a connection size of Ø = 35 / 40mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. This conversion link allows [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

Do-it-yourself kit as a replacement for the original selenium rectifier that is no longer available. This was used in the Vespa models with battery before 1979 (Vespa VNB1T, VBA1T, VBB1T, GL (VLA1T), SS180 (VSC1T), GT (VNL2T), Super (VNC1T, VBC1T), Rally200, Sprint (VLB1T) want to keep the original look can fall back on the kit offered here: A modern silicon [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

bgm - Item number: BGM2200BS07 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta LI , LIS, SX 125-150, TV 175 (series 2-3), DL / GP 125-150 - 0,7mm are also interested in: Spacer [...]

bgm - Item number: BGM7913S Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Gearbox> Screws Other customers who are interested in screw -M10 x 160mm- steel 8,8, 7913 galvanized - used for BGMXNUMX interested, also looked for:

This can block the piston. Is often used to adjust the ignition with the reversal measurement method. bgm - Item number: BU4931 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Tools> Tools Other customers who are interested in long piston stoppers -M14 x 1,25- (Type NGK E-candle) - [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]