When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

The bgm PRO Superstrong is the plug n play coupling solution for small frames - Made in Germany. Special features: Ready-to-install 4-disc clutch with organic racing pads Spring force (springs BGM XL) designed for up to 22HP / 20Nm Separates perfectly cold and warm Easy to use No changes to the cover / housing necessary Without keyway (half-moon wedge) Manufactured and assembled in Germany Delivered ready for installation [...]

Not suitable for Piaggio 50cm automatic (stock too wide, please use BGM0333 here (12x17x13mm) bgm - item number: BGM0334 Availability: in stock (please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> ball bearings Other customers who were interested in connecting rod bearings -BGM ORIGINAL (12x17x15mm) - Piaggio 70/80 cc, Vespa 50 [...]

The BGM PRO 177 piston rings are extremely break-proof, have very little friction due to their coating and are very torsion-resistant. With a thickness of 1mm, they are also suitable for very wide and high outlet shapes. The rings are packed in pairs. The piston rings with 63,0mm diameter also fit: 177 / 187ccm Parmakit 177 / 187ccm Polini Alu 177 / 187ccm Pinasco [...]

bgm - Item number: SC4013 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Rubber parts> Seals Other customers who are interested in sealing set fuel tap -BGM ORIGINAL- Vespa Wideframe VN, VM, ACMA cork are also interested in: Seal | Tank | Frame | Sight glass fuel tap | [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

Speedometer glass incl. Decorative ring WHAT FOR Perfect repair kit for the speedometer. Either to replace a scratched / defective glass or to visually upgrade the speedometer. We also offer the sets in various designs. In our opinion, the tinted glass looks particularly elegant. HOW In the set is the speedometer glass ring that connects the speedometer glass and the speedometer [...]

Cover plate to close the opening for the electric starter in the air duct of the motor housing of the PX, T5 and Cosa models. Useful if the electric starter is removed or is not available. This means that no valuable cooling air is lost. bgm - item number: 7671454 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

bgm - Item number: BGM0336 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (16x20x20mm) - Vespa PX200, Rally180, Rally200, Cosa200, Vespa T5 125cc, Lambretta LI, LIS, SX, TV, DL, GP, Piaggio SKR, TPH125, Gilera [...]

LED rear light reflector for the Lambretta. Thanks to modern LED technology, the power consumption is significantly lower than with conventional two-filament lightbulbs. This results in a better light yield for the entire system, and there is no break in the lighting effect when the brake light is activated. These are two phase LEDs. This means that each LED is used for the rear and brake lights and [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The BGM PRO QUICK ACTION pulley shortens the shift travel on the handlebar shifter. This leads to a significantly better gearshift feel as well as a more precise and faster gearshift process. The BGM role guides the train over a radius. This means that more pulling distance can be obtained with the same rotary movement than with the part originally designed only as a rocker switch. Diameter: Ø44 mm Material: [...]