The auxiliary nozzle of the SI carburetor does not have the simple function of a conventional nozzle, ie the pure regulation of the amount of fuel. With the introduction of the PX in 1977, the previously used SI carburettor type and its auxiliary nozzles were modified. The old carburetor types, such as those still used in the rally engines, had a separate air duct for the auxiliary nozzles. [...]

With the Sport and Competition line, BGM Pro has two high-quality shock absorber series in its delivery program. Both have in common the perfect workmanship, the high material quality and approval by means of ABE. Despite their high resilience, the dampers are very light, as they are made of high-strength CNC aluminum and have excellent surface protection made of hard anodized aluminum. The front [...]

High-precision BGM PRO auxiliary shaft axis for the bearing of the primary drive of the Vespa PX125-200 models. Made from extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. This means that the primary drive can be repaired with 100% factory specifications. Mandatory equipment for tuned engines. INFO: The auxiliary shaft axle has a bearing surface on which the needles of the alternator-side [...]

The bgm PRO membrane block comes with a powerful two-flap membrane. The GRP platelets are state of the art for optimum response behavior and high performance. In addition, the GRP plates have an extremely long service life, which means that maintenance is reduced to a minimum. The light metal block is vulcanized with rubber. This means that the platelets not only seal [...]

bgm - Item number: 4350032 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -Ø = 1,2mm x 2500mm, sleeve = 2200mm, nipple Ø = 3,0mm x 3mm - used as throttle cable - braided PE - gray are of interest, also looked for: [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

BGM rim for all Lambrettas of the series 1-3 (Li, LiS, TV, SX, GT, DL, GP) - painted silver. The bgm original rims offer you: High quality workmanship Very high accuracy of fit Correct rim profile Correct positioning of the valve hole Excellent concentricity for a pressed rim Excellent price / performance ratio The rim should be carefully checked each time a tire is changed. Decades-old rims [...]

bgm - Item number: BGM2254 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Crankshaft> Nuts Other customers who are interested in pole wheel nut M11 x 1,50 (high strength) Collar Ø = 24mm h = 3mm SW = 14 -BGM PRO- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3 interested, searched [...]

Special adapter that enables the BGM Pro SC / F16 Competition to be shortened by 30mm without sacrificing spring travel. Shortened PK fork This is useful with a shortened PK fork (e.g. to use it in a Vespa V50, PV, ET3). By shortening the fork with a normal length damper, the swing arm angle would be too steep and the [...]

bgm - Item number: 1079157KT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Speedometer drives Other customers who are interested in speedometer worm set -BGM ORIGINAL- Vespa 10 Teeth, Ø = 21,8mm, metal + 9 teeth, l = 31mm, 2,7mm square, black (suitable for speedometer worm 9 teeth) - (used [...]

bgm - Item number: 2599092B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburettor> Choke levers Other customers who are interested in folding choke kit -BGM ORIGINAL- DellOrto PHVA , PHBN - Elektrochoke, also searched for: Klappchok | Folding choke | Kit | Flippchoke | Flipchoke | Flip [...]