Special adapter that enables the BGM Pro SC / F16 Competition to be shortened by 30mm without sacrificing spring travel. Shortened PK fork This is useful with a shortened PK fork (e.g. to use it in a Vespa V50, PV, ET3). By shortening the fork with a normal length damper, the swing arm angle would be too steep and the caster too short. The shortened damper optimizes this again. The response of the damper due to the flatter swing arm improves and the driving stability is increased due to the greater caster. PX fork A standard PX fork can also benefit from a shortened shock absorber. If the adapter offered here is used in a BGM Pro damper for Vespa PX, the length is reduced from the original 240mm to 210mm. The response of the damper is also improved here by the flatter swing arm and the driving stability is increased by the greater caster. Possibly. further optimize the driving behavior with the different lengths of the upper spacer on the rear shock absorber. Shortened PX / Cosa fork A shortened PX / Cosa fork can either be ridden with a shortened PX damper (210mm) or a PK damper (195mm). At 210mm, the fork's swing arm is, depending on the shortening of the fork, as intended at the factory. With 195mm you get a flatter swing angle. Ultralow trolleys use the shortened PK damper with 165mm. Possibly. with the different ...
- bgm - item number: BGM7783ADJ165
- Availability: in stock (Please check availability here in Scooter Center Shop)
- Weight: approx. 0,20 kg
- Category: Frame> shock absorbers> shock absorbers
Other customers interested in front shock absorber adapter -BGM PRO for BGM PRO SC / F16 Competition - Vespa PK / PX - 210 / 165mm - used for lowering the fork, also looked for: Shock absorber adapter | Lowering | Front | Damper adapter | adapter | adapter | Landing gear adapter | Strut adapter | Shock | Absorber | Adapter | Front | Amortisseur Spring Avant | Molla Ammortizzatore Anteriore | Muelle Amortiguador Delante |