BGM Pro Spezial crankshaft with the hub and connecting rod of the 50ccm models (43mm / 87mm) combined with the large alternator stump (Ø24 / 25mm) of the PK125 ETS models. Most stable 50cc crankshaft on the market, fits into every smallframe housing with the appropriate bearing: V50, PK S, PK XL, PK XL2! For conversion bearings see accessories. Suitable for the following engines to use cylinders for V50 / PK50 [...]

We also offer so-called conversion rubbers. This allows you to bring different connection widths of carburettors and intake manifolds together. bgm - Item number: 1110022 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Rubber parts> Carburettor connection rubbers Other customers who are interested in carburetor connection rubber / intake manifold -BGM ORIGINAL Conversion - [...]

The BGM Supertorque converter optimizes the acceleration of the vehicle. It immediately keeps the engine at the speed of the highest torque, so that the full tractive power is always applied to the rear wheel. The BGM Supertorque completely replaces the converter used ex works and offers two different settings for individual adjustment to your own motor. Due to the matching [...]

Bigbore exhaust manifold for the banana exhaust from SITO, FACO or Piaggio for Vespa Primavera and ET3 models. PERFORMANCE The exhaust manifold from BGM PRO offers more passage with a diameter of 30mm. The engine can breathe more freely and generates more torque / power. 30 mm elbow for the smallframe Sito / Faco & Piaggio 125ccm banana inner diameter 30 mm material: [...]

bgm - Item number: BGM9311Z Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Frame> Seat> Retaining plate Other customers who are interested in seat retaining plate / striking plate -BGM ORIGINAL- Vespa PK50 XL2, PK125 XL2, also looked for: Seat bracket | Striking plate | Bench plate | Seat bracket | Retaining pin [...]

Tool for the exact determination of the top dead center. bgm - Item number: 7670937 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,60 kg Category: Workshop requirements> Tools Other customers who are interested in dial gauge -BGM ORIGINAL- Universal 0,01-10mm - interested without holder, also looked for: dial gauge | Ignition timing | Preignition | Zzp [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM0330 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (10x14x13mm) - Minarelli 50 cc, Morini 50 cc (type AH) are also interested in: connecting rod bearings | Needle roller bearings | Piston pin bearings | Kobo [...]

bgm - Item number: BGM6610GR Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,66 kg Category: Motor> Rubber parts> Hoses Other customers who are interested in radiator hose set -BGM PRO silicone 180 ° C- Vespa GT 125-200, Vespa GTL 125-200, Vespa GTS 125-300, Vespa GTV 125-250 - green are interested, also looked for: [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

LED rear light reflector for the Lambretta. Thanks to modern LED technology, the power consumption is significantly lower than with conventional two-filament lightbulbs. This results in a better light yield for the entire system, and there is no break in the lighting effect when the brake light is activated. These are two phase LEDs. This means that each LED is used for the rear and brake lights and [...]