bgm - Item number: BGM2775 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 75mm -BGM ORIGINAL- Vespa Smallframe V50, PV125, ET3, PK are also looking for: Engine housing bolts | Motor housing studs | Set | [...]

The tires are indisputably one of the most important components of our scooters. It establishes contact with the road and is therefore not only responsible for safety but also to a large extent for driving pleasure. The goal was to develop a tire with which you can iron through curves and roundabouts in wet conditions as well as in dry conditions [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

Set di fissaggio per il cavo contachilometri -BGM ORIGINAL- contachilometri italiani Lambretta DL, GP bgm - Item number: BGM6401SN Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Fork > Speedometer cables Other customers who are interested in fastening set for speedometer cables -BGM ORIGINAL- Italian speedometers Lambretta DL, [...]

High performance racing shaft from BGM. Suitable for all powerful smallframe motors that not only know how to use the advantage of a very well balanced shaft in conjunction with a very stable connecting rod but also urgently need it. Due to the steadily increasing performance of the supposedly small engines, the demands on the material also became higher and higher. [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM0903E Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust spring -BGM ORIGINAL- stainless steel - 70mm , also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer | Exhaust [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

BGM Pro cable branch to supplement the BGM Pro conversion wiring harness for use with a Vespatronic ignition. PROBLEM The cable colors of the Vespatronic ignition differ greatly from the conventional color scheme of a Piaggio cable harness for electronic ignitions (which is also continued in the BGM Pro conversion cable harness). Piaggio / BGM use green (engine off), blue (luminous flux), black (ground). SOLUTION The BGM Pro cable branch [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1204TL Availability: in stock (Please check the [...]

bgm - Item number: BGM0292HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 1.0mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

bgm - Item number: BGM2225HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 1,0 - XNUMXmm are interested, also looked for: Spacer | [...]