Speedometer BGM ORIGINAL 120km / h for Vespa PX (years of construction 1977-1984) Very nice reproduction of the original speedometer for the old Vespa PX models ('77 -'84). Has a precise eddy current measuring mechanism. The speed display is therefore pleasingly accurate *. Visually very close to the original, the BGM ORIGINAL speedometer also has an odometer with a hundred meter counter. The speedometer lighting uses, deviating [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

The bgm PRO Sport silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. Compared to the bgm PRO Touring silent rubbers, this version is much tighter and therefore perfect for precise handling and quick changes of direction at high speed. With the reinforced bgm motorized rubber rubbers supplied in pairs, the chassis gains directional stability, steering precision and [...]

Connection rubber for membrane kit bgm PRO for carburettors with a passage width of up to 30mm and 34mm outer diameter: Suitable for Dellorto PHBH 28-30, VHSA 28, Mikuni TM27, TM 30, Keihin PWK 28 bgm - Article number: BGM2514 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Motor> Rubber parts> [...]

Special adapter that enables the BGM Pro SC / F16 Competition to be shortened by 30mm without sacrificing spring travel. Shortened PK fork This is useful with a shortened PK fork (e.g. to use it in a Vespa V50, PV, ET3). By shortening the fork with a normal length damper, the swing arm angle would be too steep and the [...]

Our tuning fan wheel not only looks good, it also cools your engine better. This makes it ideal for tuned engines. Of course, it also looks great on standard engines. The bgm PRO Racing is also lighter than the series part. Due to the lower centrifugal mass, the engines hang more poisonously on the gas and can turn further. Technique tip: [...]

The BGM BigBox Touring - power for the big tour Torque from idle with the optics and acoustics like a standard exhaust The BGM BigBox Touring is the tour steamer in our range. Developed for full thrust from the lowest revs. Ideal for all original engines or moderate tuning cylinders such as BGM177 but also DR135 / 177, Pinasco or Polini [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM2225HS07 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 0,7 - XNUMXmm are interested, also looked for: Spacer | [...]

bgm - Item number: BGM7795S Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,40 kg Category: Frame> Body> Steering damper Other customers who are interested in steering damper -BGM PRO SC FS / 10- 380mm- 125mm damper travel - silver are of interest, also looked for: Steering damper | Steering damper | Shock absorber | Shattering | Flutter [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]