BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

bgm - Item number: BGM78ADJ Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Frames> Shock absorbers> Shock absorbers Other customers who are interested in adjusting dial damping Soft / Hard -BGM PRO- Series for shock absorbers of the series BGM PRO R12, BGM PRO SC / R12, BGM PRO SC / F16 [...]

Lambretta bgm PRO MRB RaceTour membrane piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 225 cylinder to diaphragm control and want a durable and [...]

bgm - Item number: BGM1770HS08 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacers Other customers who are looking for Spacer cylinder head -BGM PRO 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 0.8mm interested, searched [...]

Rear brake drum "Made in Germany" by Strohspeed for BGM PRO. Suitable for all Vespa models with 8 inch tires (not Vespa Super VNC / VBC). Made of high-quality cast iron, it offers enormous advantages over conventional brake drums made of thin sheet steel: suitable for original and tubeless rims no distortion due to hot brakes perfect concentricity due to exact centering over [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: BGM9011 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frame> Brakes> Brake cams Other customers who are interested in brake cams front -BGM ORIGINAL- Vespa PX ( Bj. 1984-1998), T5 125ccm, PK50 HP (V5N2T), PK50 (V5X1T), PK50 S (V5X2T), PK80 S (V8X5T), PK125 S [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Conversion brake arm including brake cam for easy conversion of the rear brake cable to modern thread technology. This means that the old type can be retired with a brake cable safety device simply by clamping. The new technology allows quick and safe adjustment using a knurled nut. Also ideal in racing when the engine is changed frequently or the brake needs to be readjusted quickly. [...]

High performance racing shaft from BGM. Suitable for all powerful smallframe motors that not only know how to use the advantage of a very well balanced shaft in conjunction with a very stable connecting rod but also urgently need it. Due to the steadily increasing performance of the supposedly small engines, the demands on the material also became higher and higher. [...]

bgm - Item number: BGM0900EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 50mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]