bgm - Item number: BGM6399UG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.9 mm x 2500mm, sleeve = 2200mm, nipple Ø = 8.0mm x 8mm, inner sleeve PE, gray - used as a clutch cable, front brake cable interested, searched [...]

Steering tube BGM PRO Vespa PK XL2 - modified for use on Vespa Largeframe (around 1961-1979) e.g. Super 125/150, Sprint150, Rally180 / 200, GT / GTR125, TS125 Motovespa DS200, Sprint / GS150 (04C), GT160 (09C ) PROBLEMS OF THE OLD ORIGINAL FORKS The forks of the old Vespa largeframe models have antiquated damping and suspension kinematics. Due to the design, the chassis hits quickly when braking hard ('goes [...]

bgm - Item number: BGM1550BS20 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL lamp bottom- Vespa Wideframe 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T - 2.0mm are interested, also looked for: Spacer | [...]

BGM PRO exhaust socket set to seal the exhaust at the cylinder socket. Suitable for all PX200, Rally200 and Cosa200 (Cosa models only with gray cast iron cylinder as standard) DIAMETER Each cylinder type (Malossi, Polini, Quattrini, Pinasco) unfortunately has its own diameter at the outlet, which differs slightly from the original. SEAL AND CLEAN The bgm Pro sockets help in a simple way to permanently seal this point [...]

Cracked! A pull rope can digest incredibly large loads. The tear limit of the trains we offer is several tons of pulling force. In a pinch you can even tow cars with it. Why a train breaks anyway depends on the fact that it is loaded incorrectly. Zugkiller No. 1 is the so-called common cast ridge. The brake-clutch levers are often [...]

bgm - Item number: 7673834 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Workshop requirements> Tools Other customers who are interested in seal remover -Sealing scraper -UNIVERSAL- 23mm also looked to: seal remover | Seal remover | Seal Ex | Sealex | Sealing scraper | Triangular scraper | Seal Remove | Remove [...]

Carburetor -PHBN 17,5- Minarelli 50ccm. The PHBN carburetors are a constant in the scooter sector. They are characterized by easy assembly and good tunability. If a DellOrto PHBN carburetor is already installed on the vehicle, it can be changed to a larger one of the same type without any problems. The PHBN 17,5 mm helps all 70s [...]

Cylinder head gasket -BGM PRO- 1,5mm Vespa 200ccm bgm - item number: 3820036 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head -BGM ORIGINAL Piaggio 200 cc- Vespa PX200, Rally200 - 1.5mm, also searched for: [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

bgm - Item number: BGM7707A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Shock absorbers> Shock absorber mountings Other customers who are looking for spring plates for shock absorber springs in front, top fork / swing arm -BGM PRO- Largeframe Sprint (VLB1T), Rally (VSD / VSE), GT / GTR125 (VNL2T), Super (VNC / VBC), TS125 (VNL3T), VNA, VNB, VBA, VBB, [...]

20-piece trim screw set. The kit contains 20 pieces each. Screws with pan head and tapping screw thread as well as 20 pcs. Speed ​​nuts. Ideal for connecting the vast majority of trim parts on, for example, Piaggio / Gilera / Yamaha / MBK / Aprilia vehicles. Dimensions: Screws: Ø screw head: 10mm Ø thread: 4,2mm screw length (without head): 12mm sheet metal nuts: length: 17mm width: 11mm bgm - item number: 7673430 Availability: in stock (Please check [...]

bgm - Item number: BGM6010S24 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,40mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]