Cable branch for connecting the battery / starter relay to the starter motor. This cable branch is not part of the rest of the cable harness and is no longer manufactured by Piaggio. Exactly reproduced in high quality according to the original. Essential part for the perfect restoration. The Elestart works like it did on the first day. bgm - Item number: SC5020 Availability: in stock (Please [...]

Latest version of the proven BGM PRO HP (High Power) ignition base plate for electronic ignition. BGM has revised the well-proven BGM PRO ignition base plate and made it even better. A significantly higher light output than with conventional base plates is complemented by the very high quality of the coils and pick-up. In addition, the cabling was converted to textile-coated silicone cables. Another one [...]

bgm - Item number: 4350011 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,14 kg Category: Frames> Cables> Cable pulls Other customers who are interested in universal pull-Ø = 1,2mm x 2500mm, nipple Ø = 5,5mm x 7mm- used as throttle cable - turned interested, also looked for: Zug | Universal | Throttle cable [...]

Precisely manufactured shift pin for all largeframe transmissions from approx. Year of construction 1984 - Vespa PX, T5, Cosa, Motovespa TX. Always used with a flat type switch cross. If a non-flat switch cross is installed in your engine and a washer is also installed between the switch bolt and the switch cross, the bolt shown here cannot be used. You have [...]

bgm - Item number: BGM7772SP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,44 kg Category: Frame> Shock absorbers> Springs Other customers who are looking for rear shock absorber springs -BGM PRO R12 V2 Black Edition , 300-310mm- Lambretta LI, LIS, SX, TV, DL, GP - black are interested, also looked for: shock absorber spring [...]

BRAKE CALIPER SET BGM PRO RADIAL suitable for VESPA PX -MAXIMUM DECELERATION WITH MAXIMUM SAFETY- BRAKE CALIPER BGM PRO 4-PISTON RADIAL The BGM PRO 4-piston brake caliper increases the effective piston and pad surface of the front brake system and thus enables braking performance at motorcycle level. With 4x25mm brake pistons, the BGM PRO brake caliper has 40% more piston area than a conventional two-piston brake caliper [...]

The bgm PRO air filter is the perfect replacement for all Series 3 paper filters from the original air filter box. Thanks to the fine-meshed stainless steel net, the bgm filter not only offers excellent filter performance, but also a significantly improved air throughput than the standard part. The filter performance can even be increased when using filter oil. For normal road use [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The bgm PRO Racing shaft with 54 mm stroke is the maximum for racing or ambitious road tuning. The cheek diameter has been increased in contrast to a normal shaft in order to achieve the necessary, higher overlap on the crank pin and thus additional security against rotation despite the increased stroke. This minimizes the risk of twisted cheeks and welding with the [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Gasket for the cylinder head, as it is included in the BGM cylinder kit. Gasket thickness head gasket: 0,5mm copper Also fits Parmakit TSV177 / 187 bgm - Item number: BGM1770GH Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Seals> Seals Other Customers who are interested in cylinder head gasket [...]

bgm - Item number: BGM12OR16N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Motor> Gearbox> Seals Other customers who are interested in O-ring 16 × 2,5mm - BGM ORIGINAL- used for kick starter shaft Vespa V50, PV125, ET3, PK, PX, T5 125ccm, Cosa, Rally, Sprint, TS, GT, GTR, Super, GS160 / GS4, [...]