BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

abcde X 01 2,48 1,20 26,00 X 02 2,50 1,80 24,00 X 03 2,46 1,60 22,00 X 04 2,48 1,80 20,00 X 05 2,46 1,80 24,00 X 06 2,50 1,20 26,00 X 07 2,50 1,80 20,00 X 08 2,50 1,40 26,00 X 09 2,50 1,40 18,00 X 10 2,50 1,40 20,00 [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

The main nozzle of the SI carburetor determines how much gasoline is made available for the so-called premix or pre-expansion. The larger the displacement and the higher the liter output, the greater the need for spraying, roughly speaking. The available palette ranges from 90-160. A 102 main jet has a bore of 1,02mm, and is therefore less [...]

BGM Pro 'Easy Mount' oil filter for Piaggio / Gilera / Aprilia Leader & Quasar engines 125-300ccm The BGM Pro Easy Mount oil filter has the most modern microfilter technology and thus guarantees perfect protection of the interior of the engine. In addition, it can (in contrast to the original Piaggio oil filter) be changed quickly and easily with normal tools (ring spanner or socket, wrench size 21). Technical characteristics: [...]

Complete indicator set with approval (E-mark) incl. Glasses and bulbs, suitable for all Vespa PX and T5 models. They can be used without hesitation in road traffic and do not require registration. The housing and the glass are unfortunately not 100% matching in terms of their contour. As a result, moisture can penetrate the turn signals and fog the glass. Resourceful [...]

Do-it-yourself kit as a replacement for the original selenium rectifier that is no longer available. This was used in the Vespa models with battery before 1979 (Vespa VNB1T, VBA1T, VBB1T, GL (VLA1T), SS180 (VSC1T), GT (VNL2T), Super (VNC1T, VBC1T), Rally200, Sprint (VLB1T) want to keep the original look can fall back on the kit offered here: A modern silicon [...]

Perfectly matching new edition of the leg shield edge protection for the Vespa PK50 S, PK80 S, PK125 S and PK125 ETS models. The PK S / PK ETS models have, compared to all other models, an inverted flanging of the leg shield edge. The PK S / ETS-specific edge protection was therefore not available for years. The edge protection is available in: Silver (PK S [...]

Special rear wheel bearing from BGM PRO for the Lambretta motors of series 1 to 3. The special bearing made only for the Lambretta has an integrated shaft seal. The assembly of the shaft sealing ring is not necessary with the BGM bearing, the high-quality sealing ring (NBR) is already assembled. The internal clearance is adapted to the assembly characteristics of the Lambretta motors. It is completely [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

Please note: Piaggio 50-80ccm automatic vehicles (not PK automatic) generally use PHVA carburettors. The Hyper2 motors (from around 2001) use their own float chamber. This has a drain with hose and a drain plug. These carburettors require the float chamber with item number 1484704. NOTE: If it drips out of the hose, it is not the screw that is leaking, but the [...]

bgm - Item number: BGM6475B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,40 kg Category: Workshop requirements> Trains Other customers who are interested in outer cover -BGM ORIGINAL, PE inner cover- Ø outside = 5mm (l = 25 meters) - interested in black, also looked for: outer shell | Train | Coat | Outer cable | [...]