Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Clutch pads BGM PRO Superstrong 'Big Ear' Racing type PK XL2 / FL2 / HP (also suitable for V50, 50N, PV, ET3, PK S, PK XL) - 4-disc CR80 pads with extra wide tab for all smallframe motors Pad type with 1x large bracket for maximum support in the clutch basket Sintered lining material such as Honda CR80 Suitable for all smallframe clutches Lining thickness (incl. carrier material): [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

BGM PRO Superstrong clutch linings type CR Suitable for retrofitting all clutches of the COSA2 type (exception: BGM Superstrong CR) for Vespa Largeframe (PX / Cosa / T5, Rally etc.) This CR lining set contains: 3x clutch discs with two sides, 1x one-sided clutch disc 4x Clutch steel disks This makes it suitable for all Vespa largeframe clutches of type COSA2 (exception: BGM Superstrong [...]

bgm - Item number: BGM1212BG2A Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Engine> Seals> Seals Other customers who are interested in gasket cylinder base -BGM ORIGINAL 125-150 ccm , 2 channel VNA, VNB, VBA, VBB, VNC, VLB, Sprint, GT are interested, also looked for:

BGM PRO Vario-kit with an extra long gear range, perfect pulling power and high rear wheel performance. The BGM Vario uses a shorter (kevlar reinforced) V-belt than is usual for Quasar motors. This allows the BGM to drive a significantly wider range of ratios without the V-belt touching the housing, as is the case with a Malossi Vario, for example. As a result, the [...]

The Vespa forks with separate mounts for shock absorbers and springs all tend to bottom out during hard braking maneuvers. The long lever of the swing arm in relation to the center of the axle of the front wheel allows the front to submerge even when the front brake is operated normally. A tighter spring can help quickly and cheaply. We have a spring made of stainless steel in Germany.

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Complete locking set for the auxiliary shaft of Vespa largeframe engines such as PX, T5, Cosa, Rally Contains 1x washer 1x locking washer 1x nut M9 / SW17 Tightening torque of auxiliary shaft nut: 30-35Nm The reinforced BGM primary repair set (BGM0195F48) and the auxiliary shaft set ( BGM6503PKT) bgm - item number: BGM6503NKT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

bgm - Item number: BGM2750 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 50mm -BGM ORIGINAL- Vespa Largeframe standard (1957-) were also looking for: engine housing bolts | Motor housing studs | Set | Motor screw set | [...]

The bgm PRO Racing shaft with 54 mm stroke is the maximum for racing or ambitious road tuning. The cheek diameter has been increased in contrast to a normal shaft in order to achieve the necessary, higher overlap on the crank pin and thus additional security against rotation despite the increased stroke. This minimizes the risk of twisted cheeks and welding with the [...]