Ignition / generator 6V, 3 coils, 5 cables, AC (vehicles without battery) Suitable for all Vespa models from around 1960-1980, e.g. GL150 (VLA1T), Sprint150 (VLB1T), Sprint 150 Veloce (VLB1T), Super Sport 180 (VSC1T) A complete replacement ignition base plate with all coils as well as the contacts and the capacitor is supplied. The connection cables have the original colors, the [...]

Oil can holder BGM PRO as a nice add-on for spare wheel holder in the leg shield / passage of Vespa and Lambretta The ideal place for a vintage oil can made of sheet metal (e.g. BGM3000 or BGM3000EC). The oil can holder is simply screwed onto the spare wheel holder and / or the spare wheel itself. With Vespa PX / LML it can also be used under the left side panel (if necessary, move the battery / horn rectifier). Attachment of the oil can eg [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The Fast Flow petrol taps have a high flow rate and ensure a perfect supply of fuel to the carburetor even on powerful engines. They can be exchanged 1: 1 for the original fuel tap. The version shown here shows a special version for wideframe with the petrol outlet in the direction of travel to the right. The functionality corresponds to that of a conventional [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

The proven BGM Superstrong clutch is now also available for the Vespa GS150 / GS160 and SS180 models. The coupling is delivered ready for installation. It replaces the serial coupling of the GS / SS models 1: 1 and can usually * be used without further modifications. The clutch is available with 22 teeth (like the original) or with 23 teeth (longer reduction). Helical teeth [...]

Carburetor kit especially for the BGM RT Lambretta cylinder. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with an MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or bgm [...]

bgm - Item number: BGM2225HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 1,0 - XNUMXmm are interested, also looked for: Spacer | [...]

Repair kit BGM PRO for the primary reduction of BGM PRO with straight-toothed primary gear (62/63 teeth) for Vespa Wideframe engines, e.g. Vespa VM, VN, VL, VB, VNA, VNB, VBA. The springs contained in the large primary gear serve as shock absorbers. They protect the gear unit from high load peaks. If they are too soft in relation to the engine torque, they are completely [...]

bgm - Item number: BGM2586 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,11 kg Category: Engine> Carburettor> Spacer Other customers who are looking for intake manifold spacers -BGM PRO Malossi / Polini-Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - 10mm are interested, also looked for: Intake manifold spacer | Spacer [...]

The right measuring tool to set the gear backlash, the contact distance or the valve clearance. bgm - Item number: 1800013 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Workshop requirements> Tools Other customers who are interested in Feeler Gauge -UNIVERSAL- 20 blades, metal - 0.05- 1.00mm + 0.002-0.040 inch are also looking for [...]