Carburetor kit especially for the BGM RT Lambretta cylinder. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with a MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or bgm air filter box (BGM4488) can be used without any problems. The carburettors - like the original Keihin PWKs - can be adjusted very well and impress with their good consumption values. A good starting nozzle for the RT cylinder and the bgm Lambretta Big Box consists of: Main nozzle: 120-125 Secondary nozzle: 45-48 needle JJH or GJH (first clip from above) needle nozzle: 12mm (original Polini = 10mm) The scope of delivery includes: Intake manifold with rubber, clamp Polini carburettor Main jet set BGM (125-148) Auxiliary jet set BGM (30-52) Needle JJH Throttle cable XL inside (with additional screw nipple for the gauze reel) Throttle cable guide 180 ° for original throttle outer casing Cable choke set including solder nipple Note: Please cylinder hoods without Air Use the scoop or remove it from the hood. TIP: Like the original PWK carburettors, the Polini carburettors are very sensitive to the setting of the mixture screw. If the engine stalls at too high a speed after full throttle, the auxiliary jet is usually too rich. To use the auxiliary jet that is too greased ...
- bgm - item number: BGM8597
- Availability: not in stock (please check availability here in Scooter Center Shop)
- Weight: approx. 1,60 kg
- Category: Engine> Carburetor> Carburetor Sets
Other customers who were interested in carburetor kit -BGM PRO 195-225 ccm- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - Ø = 30mm Polini also looked for: Carburetor | Carburetor | Gasifier | Atomizer | Carburator | Carburettor | Carburetor | Carb | Carburateur | Carburatore | Carburador | Carburetor kit | Carburetor set | Carburetor | Set | Carburetor | Kit