Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

Small antique metal rear light that cuts a fine figure on many Vespas. Very high quality reproduction with a solid metal die-cast housing. Comes complete with a black rubber seal and both 6 V and 12 V lamps. bgm - Item number: BGM5032 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

bgm - Item number: BGM2758 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 58mm -BGM ORIGINAL- Vespa Smallframe V50, PV125, ET3, PK are also looking for: Engine housing bolts | Motor housing studs | Set | [...]

Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]

The BGM multitool tool BGM8811N contains two tools in one: Pole wheel puller (M28x1 external thread) Clutch puller (M26x1 internal thread) The pole wheel puller (M28x1) fits all Vespa with electronic ignition (exception Vespa Rally200 Femsatronic and PK automatic), including our ignitions for converting the Vespa Sprint / VBB and V50 / Primavera as well as the Malossi VesPower ignitions. This puller type is also suitable [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]

Complete set, which unfortunately often becomes due when thieves were at work. bgm - Item number: R246050281 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,75 kg Category: Frame> Body> Locks Other customers who are interested in lock set -MBK / YAMAHA- Yamaha Aerox (YQ50 / L, 2-stroke) (2003-), MBK Nitro (YQ50 / L, [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

BGM PRO Oversize screw / clamp nipple in excellent quality, manufactured by a supplier for the Japanese motorcycle industry. The BGM PRO Oversize types have five special features: Production to oversize (Ø10.06mm) Stepped collar at the upper end With a wrench surface to hold against (SW = 9mm) With 3.5mm hexagon socket (like original Innocenti) With internal clamping plate to protect the train OVERSIZE The [...]

The bgm PRO membrane block comes with a powerful two-flap membrane. The GRP platelets are state of the art for optimum response behavior and high performance. In addition, the GRP plates have an extremely long service life, which means that maintenance is reduced to a minimum. The light metal block is vulcanized with rubber. This means that the platelets not only seal [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]