Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

bgm - Item number: BGM9914G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Seals> Seals Other customers who are looking for cylinder gasket set -BGM ORIGINAL 50 cc- Peugeot LC (horizontal, round cylinder, 2013-) - Speedfight3 50 LC (F1A), Speedfight4 50 LC, Jet Force C-Tech [...]

Gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality production (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring ready for direct installation TRANSMISSION OIL CONTROL Place the vehicle on a level surface. Unscrew the oil dipstick [...]

bgm - Item number: BGM6490 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Frame> Wheels> Clamping nipples and screw nipples Other customers who are interested in rear brake cable clamping plates -BGM ORIGINAL- Lambretta D (1953-), LD (1953-), E, ​​F, LI, LIS, SX, TV, DL, GP are interested, also searched [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Material: The BGM crankshafts are forged like in the good old Piaggio times. During forging, the material is pressed together under high temperature and high pressure. This results in a higher density of the material. Heat is dissipated much better. The material is more resistant to distortion. This is a huge advantage compared to the reproduced crankshafts from other manufacturers whose materials are used.

Nice PX Kickstarter in high quality and clean finish. Aluminum bgm - Item number: 5050019 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Motor> Gearbox> Kickstarter Other customers who are interested in Kickstarter-BGM ORIGINAL- Vespa PX, Cosa - aluminum interested, also looked for: Kickstarter | [...]

Motor housing bolt set that contains all removable motor bolts of the motor housing. The bolts are made of high-strength steel (10.9) and are permanently protected against corrosion by a browning process. Also included are the snap rings, washers and nuts, all of which are galvanized. The set corresponds to the original dimensions used ex works and is a high-quality 1: 1 replacement for the original [...]

bgm - Article number: BGM4960 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,71 kg Category: Frame> Body> Main stand Other customers who are interested in main stand -BGM PRO Soft Stop System Ø = 20mm- Vespa Smallframe V50, V90, PV125, ET3 - chrome are interested, also looked for: main stand | Stand | [...]

Oversize O-ring in order to achieve a sufficient sealing effect even with a slightly knocked out hole for the shift linkage. Please use with grease to avoid damage during assembly. bgm - Item number: BGM12OR7N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Seals> [...]

BGM adjusting screws are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6495S30X Availability: in stock (Please [...]