The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set is available on all Lambretta series 1-3 models as well as [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM6396UG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,16 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -BGM ORIGINAL, Ø = 1.2 mm x 2500mm, sleeve = 2200mm, nipple Ø = 3mm x 3mm, inner sleeve PE, braided cable, gray - used as a throttle cable interested, searched [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

The pole wheel of the V50, PV125, ET3 etc. is flatter than that of the later PK models. Anyone who converts their engine to modern ignition technology (or swaps the entire engine) will no longer get the old original fan wheel cover installed. This is where our spacer comes in, which separates the cover from the pole wheel. Simply place between the cover and the motor housing [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Cylinder base gasket -BGM PRO- 1,5mm Polini 177ccm bgm - item number: 3820041 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Polini / Parmakit 177 ccm- Vespa PX80, PX125, PX150 - 1.5mm, searched [...]

bgm - Item number: 1079157B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Speedometer drives Other customers who are interested in speedometer worm on shaft -BGM ORIGINAL- Vespa 10 Teeth, Ø = 21,8mm, metal (suitable for speedometer worm 9 teeth) - (used in Vespa V50, 50N, 50L, 50R [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

Spacer -BGM PRO- Vespa V50, PV 125, ET3, PK 50-125 - 8 mm. Spacer to compensate for the longer connecting rod of the 54 mm long stroke shaft. bgm - Item number: BGM0223 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Motor> Cylinder> Spacer Other customers who are [...]

Carburetor kit especially for the BGM RT Lambretta cylinder. The carburetor kits are based on the Polini carburettors and our bgm PRO intake manifold. The nozzle comes with an MB rubber rubber and offers the maximum possible distance between the carburetor and the side panel. The carburetor sits as well as in the original position and is also straight. The original or bgm [...]