A well-functioning electronic ignition is heavily dependent on whether the trigger surfaces of the pole wheel are precisely aligned with the induction lugs of the pickup on the ignition base plate. Due to the addition of manufacturer tolerances (e.g. different cone angle, different construction heights) it can happen that this alignment is no longer given. This steel plate set can be an inexpensive and quick solution. In order to [...]

Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

bgm - Item number: 3333084 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 177 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - [...]

bgm - Item number: SCK1801M Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Clothing> T-Shirts Other customers who are interested in T-shirt -BGM Supercharged- black - M interested, also searched for: Tshirt | Maglietta | Tshirts | Clothing | Present | Gift | Gift idea | [...]

Clever tool from BGM for the damage-free installation of studs. Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. It is braced with the thread of the stud bolt. Now turn the outer wrench flat. The stud bolt is fixed and is loosened or screwed in. Pay attention to a sufficiently firm counter-locking so that [...]

BGM PRO 177CC CYLINDER FOR VESPA PX125 / 150 (ALSO WITH ELECTRIC STARTER) New version of the proven BGM177 cylinder for Vespa PX125 / 150. Now also suitable for vehicles with an electric starter. EVERYDAY PERFORMANCE PLUS The BGM177 cylinder is a very powerful, durable and fully everyday retrofit cylinder. It covers a very wide range of possible uses. One can with him, through [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Cylinder head gasket -BGM PRO- 2.0mm Polini 177ccm, DR 177ccm bgm - item number: 3820054 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in Rally, Sprint, VBB, Super, VNA, VNB, etc. The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more durable and safe on the road. The non-contact CDI ignitions are almost indestructible and reliable, and the light output with a modern, regulator-supported on-board electrical system is around

To be able to mount a different handlebar on your scooter, you need a suitable holder. The brackets are designed to fit our downhill and Fehling handlebars with a 22,2mm diameter. The workmanship and fit are at a very good level and assembly is child's play. This ensures that the handlebars are always securely seated. bgm [...]

Set of engine oil dipstick and gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality manufacture (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring Ready for direct installation ENGINE OIL CHECK Do not run the engine warm, if necessary [...]