Screw for attaching the luggage compartment / glove compartment to the frame. Is inserted from the fender side below the cascade through the holes in the main frame and countered on the back. TIP: The PX models use a total of 4 screws. The older models such as Rally, Sprint etc. only use this type of screw for the lower fastening straps, ie here only 2 [...]

bgm - Item number: BGM8801Y Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Clutch> Springs Other customers who are interested in clutch spring set for clutch BGM PRO Superstrong - BGM PRO XXL- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

bgm - Item number: BGM8800Y Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Clutch> Springs Other customers who are interested in clutch spring set for BGM PRO Superstrong clutch - BGM PRO XL- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 [...]

Like the Italian PK XL125 models, the Indian-made SE2 motor housings can be actuated with just one (rigid) pull. However, the hole in the housing for the abutment bushing attached to the train (with which the train is supported against the housing) is larger than usual in Indian housings. Our adapter resembles the too large [...]

Cylinder head gasket -BGM PRO- 1,5mm Polini 177ccm, DR 177ccm bgm - item number: 3820047 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

bgm - Item number: 3330284 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 0,5mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

Material: The BGM crankshafts are forged like in the good old Piaggio times. During forging, the material is pressed together under high temperature and high pressure. This results in a higher density of the material. Heat is dissipated much better. The material is more resistant to distortion. This is a huge advantage compared to the reproduced crankshafts from other manufacturers whose materials are used.

bgm - Item number: BGM7788SPC Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Frame> Shock absorbers> Shock absorbers Other customers who are looking for spacers for front shock absorber mount -BGM PRO- interested in SC / F16 Sport / Competition (Vespa GTS125-300, Sprint50-150, Primavera 50-150) - 0,20mm, also looked for: Spacer | Spacer plate [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

bgm - Item number: BGM8310 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutches Other customers who are looking for Spacer clutch cover -BGM PRO- Vespa Wideframe VM1T , VM2T, VN1T (-60000), VU1T, ACMA 125 (1951-1955), Motovespa 125N (1953-1958) - Ø = 128 × 1,5mm, also looked for: [...]