Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

bgm - Item number: BGM8505S Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Service> Carburetor components Other customers who are interested in float needle -BGM PRO- for Keihin PWK 20, 22, 24, 26, 28, Polini CP Ø = 17,5-24mm, Polini 28, 30, 32, 34 are interested, also looked for: [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1201TL Availability: in stock (Please check the [...]

bgm - Item number: BGM7707A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Shock absorbers> Shock absorber mountings Other customers who are looking for spring plates for shock absorber springs in front, top fork / swing arm -BGM PRO- Largeframe Sprint (VLB1T), Rally (VSD / VSE), GT / GTR125 (VNL2T), Super (VNC / VBC), TS125 (VNL3T), VNA, VNB, VBA, VBB, [...]

With the bgm lift kit you can improve your chassis considerably. The back of the scooter is raised by a good 4 cm. This gives you a much better steering behavior and a more favorable weight distribution. Also looks razor-sharp! All hijackers are made of solid aluminum CNC and color anodized. Can be installed in just a few minutes. When used on vehicles [...]

Manufactured exactly according to our specifications, we have managed to use a very high quality organic pad mixture that is pressure and temperature stable on the one hand, but is still low in wear. The whole thing combined with a very good grip to always have the full torque on the rear wheel. Even with a very high spring force used, the separation path is [...]

bgm - Item number: BGM4506 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,30 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO Sport, short- Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - black are interested, also looked for: brake levers | Brake handle | [...]

bgm - Item number: BGM6190 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,84 kg Category: Engine> Gearbox> Main shafts Other customers who are interested in main shaft -BGM ORIGINAL- Lambretta LI, LIS , SX, TV (series 2-3), DL, GP are also interested in: Main shaft | Axle shaft | Drive shaft | Secondary wave [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The BGM clutch linings are manufactured according to special specifications in order to obtain a high-quality, organic lining mixture. This is both pressure and temperature stable and offers the friction disks a good grip. This means that the full torque is always transferred to the gearbox and quick starting processes are also easily handled. A clutch equipped with BGM linings separates due to [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]