bgm - Item number: BGM2254 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Crankshaft> Nuts Other customers who are interested in pole wheel nut M11 x 1,50 (high strength) Collar Ø = 24mm h = 3mm SW = 14 -BGM PRO- Vespa Wideframe VM, VB, VL, VNA, VBA, GS150 / GS3 interested, searched [...]

bgm - Item number: BGM6710W Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,40 kg Category: Frame> Electrics> Vehicle electrics Other customers who are interested in adapter cable set for horn rectifier -BGM PRO- used for BGM6710, also looked for: Horn rectifier | Horn regulator | Horn transformer | Rectifier | Diode | Diodes [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

The bgm PRO Superstrong is the plug n play coupling solution for small frames - Made in Germany. Here in a special version for auxiliary shafts from the Italian manufacturer DRT Racing. Its auxiliary shafts move the clutch 1,5mm further towards the clutch cover. In order to avoid distancing, we offer a coupling that compensates for exactly this 1,5mm. [...]

Ignition / alternator with ignition contacts for Vespa P125X, P150X, Italian version without battery with 4 indicators. 12Volt, 5 coils, 3 cables, AC A complete, ready-to-install replacement ignition base plate with all coils as well as the contacts and the capacitor is supplied. The connection cables have the original colors, so replacement is made easy. On-board voltage: 12V AC cable: 5 [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM1770BS08 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 0,8mm interested, searched [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

For Quattrini M210 reworked manifold for the bm PRO Big Box. This means that all Big Boxes of versions 2 to 4 can be installed on the Quattrini M210. The M210 has an angled exhaust flange on the cylinder. The angle can only be found on the M210. The TS1 outlet connection must also be reworked and adapted. The distance [...]

If the clutch rubs against the cover, but it has already been machined / turned out, it is usually due to a pad package that is too thin. Some manufacturers use thinner friction discs, which increases the overall height of the clutch. The spacer offered here is placed under the large locking ring to compensate for the total height and reduces the installation height again. NOTE: Do not use to [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]