If the clutch rubs against the cover, but it has already been machined / turned out, it is usually due to a pad package that is too thin. Some manufacturers use thinner friction discs, which increases the overall height of the clutch. The spacer offered here is placed under the large locking ring to compensate for the total height and reduces the installation height again. NOTE: Do not use to save yourself having to rework the clutch cover. Otherwise it is possible that the separation path of the coupling is too small.
- bgm - item number: BGM8040CRSB
- Availability: in stock (Please check availability here in Scooter Center Shop)
- Weight: approx. 0,09 kg
- Category: Engine> clutch> clutch plates
Other customers who are interested in spacers for clutch linings -BGM PRO- Vespa type Cosa2, PX (1995-), CR - 1,0mm - (optionally required, assembly under circlip) also looked for: Clutch steel disc | Cutting disc | Clutch disc | Steel washer | Clutch | Steel | Plate | Disque Lisse D'Embrayage | Disco In Acciaio Frizione | Disco Embrague |
