High performance racing shaft from BGM. Suitable for all powerful smallframe motors that not only know how to use the advantage of a very well balanced shaft in conjunction with a very stable connecting rod but also urgently need it. Due to the steadily increasing performance of the supposedly small engines, the demands on the material also became higher and higher. [...]

Throttle cable elbow set, as it is used as standard on our BGM carburettors. The throttle cable guide is not screwed tightly into the carburetor cover, but remains pivoted. The guide is attached with a clip on the underside. In this way, covers that have a thread (which may be defective) can be converted or reused without any problems. Including solid brass adjusting nut for [...]

Replacement piston rings for the BGM Vespa - 200cc cylinder. Installation clearance: 0,21 (Italian dimension) bgm - Item number: BGM8100 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Cylinder> Piston rings Other customers who are interested in Piston rings -BGM ORIGINAL- Vespa 200 cc - Rally200, PX200, Cosa200 - [...]

bgm - Item number: BGM6010S21 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are interested in gear shims -BGM ORIGINAL- Lambretta series 1-3 - 2,10mm are also looking for: Gear shim | Thrust washer | Washer gear | Gear disc | [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

bgm - Item number: 2599092B Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Carburettor> Choke levers Other customers who are interested in folding choke kit -BGM ORIGINAL- DellOrto PHVA , PHBN - Elektrochoke, also searched for: Klappchok | Folding choke | Kit | Flippchoke | Flipchoke | Flip [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

BGM PRO STREET transmission oil SAE30 * - API GL3 Classic single-grade oil, as prescribed by Piaggio for all Vespa manual motors. Covers everyday load conditions perfectly and is ideal for series engines through to high-end tuning engines. Mildly alloyed, ideally suited for oil bath clutches Well-adhering, pressure-resistant lubricating film Excellent oxidation stability Wear-inhibiting * The specification SAE30 refers, differently [...]

bgm - Item number: BGM2758 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 58mm -BGM ORIGINAL- Vespa Smallframe V50, PV125, ET3, PK are also looking for: Engine housing bolts | Motor housing studs | Set | [...]

The BGM PRO assembly kit for handlebar end mirrors can be used universally for all motorcycles and scooters. With the adapter, a handlebar end mirror can be mounted quickly and easily. No modifications to the fittings or the handlebars are necessary. (Vehicles whose rubber grips are still closed at the end can be equipped with open grips or, alternatively, the existing grips with [...]

Exact copy of the legendary Giuliari Ancillotti bench from the 70s and 80s. Pressed metal frame High-quality and sturdy seat foam. Hand-sewn cover. Optional yellow or white Giuliari lettering. The seat is also suitable for use with a pillion passenger. The combination of continuous upholstery makes it exceptionally comfortable. In contrast to the original, which served as a template, the area [...]