SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfectly suited for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for wiring the on-board electronics of two-wheelers reliably and with permanent protection. We always offer the plugs as a pair, ie "male" and "female" in a set. They are available with 2, 3, 4 and 6 plug contacts. TIP: The contacts should be processed with crimping pliers for optimal contact and tensile strength (see accessories). Features: waterproof to IP 67 max. 13A max. 24V DC -40 ° C to + 120 ° C Resistant to: ozone, salts, petrol, diesel, brake fluid and engine oil Scope of delivery: 1x socket housing 6-pin 1x pin housing 6-pin 3x socket contact 0,55-1,25mm² 3x pin contact 0,55, 1,25-4mm² 1,7x single wire seal for outside diameter 2,7-XNUMXmm NOTE: The sets always contain one more plug contact than required for the respective plug. So you always have a reserve and can crimp a cable again if necessary.
- bgm - item number: BGM66090P2
- Availability: in stock (Please check availability here in Scooter Center Shop)
- Weight: approx. 0,00 kg
- Category: Workshop supplies> electrics
Other customers who were interested in connector set for wiring harness -BGM PRO- type series 090 SMTO MT Sealed, Bihr, 2 plug contacts, 0.85-1.25mm², waterproof- also looked for: Connector | Cable | Ignition stator | Connection | Connector | Ignition stator connector | Ignition connector | Base plate connector | Connectors | Connector | Plug | Stator | Wires | Connecteur Pour Fils De Stator | Tappo Per Cavi Stators | Clavija Para Cable Placa De Bobinas |
