Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was dimensioned so (250mm) that there is always a perfect view to the rear. It only protrudes slightly beyond the lateral contour of the scooter. This fully maintains its practicality, even when things get tight ... STABLE The mounting arm has a stable 10mm diameter. This means that it has very little vibration, which is also favored by the small and lighter mirror head. A good view is therefore guaranteed even if the engine vibrates. ADJUSTMENT The mirror adjustment works comfortably and tightly, which means that the mirror always remains in the position that has been set and does not adjust itself. The adjustment range is pleasantly large *. SCOPE The BGM PRO mirror is delivered ready for installation with an M10 thread including lock and fastening nuts. An M10 washer and corrugated washer are also included. FINISHES The mirror is available with a high-quality chrome plating or a satin matt black coating. ASSEMBLY A mounting plate for the handlebar is required for assembly. We recommend the holder from RMS (3330807, see also accessories). The screws enclosed have a sufficient length.
- bgm - item number: BGM5661CR
- Availability: in stock (Please check availability here in Scooter Center Shop)
- Weight: approx. 0,80 kg
- Category: Frame> handlebars> mirrors
Other customers who are interested in mirror -BGM PRO, Ø = 105mm- Vespa V50, 50N, PV125, ET3, Rally, Sprint, PX, Super, TS125, GT125, GTR125, GL150, SS180 - chrome, right were also looking : Mirror | Spigel | Rearview mirror | Side mirror | Handlebar mirror | Outside mirror | Mirror | Rétroviseur | Miroir | Specchietto | Specchi Retrovisori | Espejo | Retrovisor | Retrovisions