BGM PRO water pump paddle wheel for Piaggio Maxi 125/180 LC The BGM PRO pump wheel is made of high-strength aluminum and is CNC milled out of solid material. It replaces the plastic wheel installed at the factory 1: 1. BACKGROUND INFORMATION Early 125 / 180cc Piaggio Maximotors, such as those built into the Gilera Runner FX / FXR, Piaggio Hexagon EX / LX / LXT and the popular Italjet Dragster 125/180 models, received a cast aluminum paddle wheel for the water pump from Piaggio. For cost reasons, Piaggio switched to a plastic wheel during production. PLASTIC VS ALUMINUM The two-part plastic wheel can come loose from the brass nut. A defect that happens unnoticed and leads to a total failure of the water pump. The one-piece BGM PRO pump wheel made of high-strength aluminum, on the other hand, is permanently stable and does not need any attention during the entire service life of the engine. CONCLUSION A very solid and above all permanent solution for the water pump. NOTE The water pump wheel has a left-hand thread, so it is loosened clockwise.
- bgm - item number: BGM4830
- Availability: in stock (Please check availability here in Scooter Center Shop)
- Weight: approx. 0,02 kg
- Category: Engine> crankcase> water pump revision kits
Other customers who are interested in water pump paddle wheel -BGM PRO Alu CNC- Piaggio 125-180 cc LC 2-stroke also looked for: Water pump paddle wheel | Wapu | Water pump wheel | Paddle wheel | Water pump impeller | Conveyor wheel | Drive wheel | Wheel | Impeller | Pump | Water pump | Paddle | Wheel | Roue à Aubes | Girante Per Pompa Acqua | Rueda De Paletas De La Bomba De Agua |
