Fuel hose elbow from BGM made of stainless steel. For the first time offered under the sales name 'Ron Bogen' in the German Scooter Forum. This is placed in the hose directly after the fuel tap and, thanks to a 55 ° deflection, offers a much better connection option for the fuel hose. This effectively prevents the hose from kinking, and the engine always receives a full charge of fresh petrol. The assembly takes place as close as possible to the outlet of the fuel tap. To do this, attach a short piece of fuel hose (approx. 3-4cm) to the fuel tap, then the fuel hose elbow and then the rest of the hose to the carburetor. Suitable for the standard Piaggio petrol hose with Ø7mm inner diameter. Delivered with hose clamps TIP: Basic rule for laying the hose: As short as possible, as long as necessary. Always attach the hose to the tank / elbow first, insert the tank and only then connect it to the carburetor. This is the only way to achieve the shortest possible hose length. A good alternative to the original fuel hose is the spiral wire reinforced Toyox hose (see accessories). This is an ideal addition due to the built-in reinforcement. Heat the ends for easier assembly.
- bgm - item number: BGM3033
- Availability: in stock (Please check availability here in Scooter Center Shop)
- Weight: approx. 0,01 kg
- Category: Frame> tank> hoses
Other customers who are interested in fuel hose bend 55 ° bent -BGM PRO- Vespa (Ø outside = 10,0mm, Ø inside = 7,0mm) - stainless steel, also looked for: Ron bow | Ronbogen | Fuel hose | Petrol hose piece | Petrol hose banjo | Connector | Fuel hose adapter | Hose | Holder | Gasoline | Elbow between fuel tap and hose | Ron Bow | Petrol hose elbow | Management | Fuel | Pants | Tuyau De Carburant | Tubo Carburante | Combustible Manguera | Combustible | Nafta |