Other customers interested in spacer cylinder base -BGM ORIGINAL- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 1.0mm also looked for: Spacer | Cylinder base | Distance seal | Distance | Cylinder spacer | Head spacer | Foot spacer | Cylinder | Base | Cale D'Embase De Cylindre | Spacer Base Del Cilindro | Spacer Pié Del Cilindro |
Lambretta cylinder base gasket with a thickness of 1,5 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.
Cylinder base spacer for the Malossi cylinder Sport and MHR with 210ccm. This can be used to support the cylinder in order to increase the steering angle that is important for performance. The MHR cylinder in particular has turned out to be a very grateful candidate for a lift, despite its much larger flushing cross-sections than its predecessor. A prerequisite is an environment that corresponds to the cylinder, such as [...]
If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]
Gasket set cylinder Minarelli 50 AC vertical bgm - Item number: R100689000 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Seals> Gaskets Other customers who are interested in gasket set cylinder - BGM ORIGINAL 50 cc- Minarelli 50 cc AC (vertical) - BOOSTER, BUMP50, BWS50, SLIDER50, SPY, [...]
