The Vespa forks with separate mounts for shock absorbers and springs all tend to bottom out during hard braking maneuvers. The long lever of the swing arm in relation to the center of the axle of the front wheel allows the front to submerge even when the front brake is operated normally. A tighter spring can help here quickly and cheaply. We have a stainless steel spring made in Germany that is approx. 30% harder than the original. In addition to being completely rust-free thanks to the stainless steel used, it is also shot-peened and therefore has an even higher fatigue strength than usual. The front of the vehicle is now much less submerged and can therefore be controlled much better even when braking hard, as the caster no longer changes as much. The BGM F16 shock absorber with adjustable damping is an ideal addition. This can be perfectly adjusted to the tighter spring in order to achieve a good overall package of tighter spring and the desired damping. This means that two people and / or a lot of luggage can safely be jetted through every curve. 30% tighter material. Stainless steel Made in Germany Shot-blasted Stainless (US)
- bgm - item number: 7671022
- Availability: in stock (Please check availability here in Scooter Center Shop)
- Weight: approx. 0,85 kg
- Category: Frame> shock absorbers> springs
Other customers who were interested in shock absorber spring front -BGM PRO SC, l = 165mm- Vespa Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super - Are interested in stainless steel, also looked for: Shock absorber spring | Front | Damper spring | Spring | Suspension | Coil spring | Strut spring | Shock | Absorber | Spring | Front | Amortisseur Spring Avant | Molla Ammortizzatore Anteriore | Muelle Amortiguador Delante |
