IGNITION CABLE BGM PRO SILICONE 7MM The BGM Pro silicone ignition cable is a real professional product. The tinned copper wire with 1,5mm² enables a powerful spark under every condition. It is suitable for retrofitting on every motor and offers the following advantages compared to a standard PVC cable: High voltage resistant up to over 50000V (50kV) Heat resistant up to 200 ° (fire protection class FT-1 / VW-1) Copper core [...]
IGNITION CABLE BGM PRO SILICONE 7MM The BGM Pro silicone ignition cable is a real professional product. The tinned copper wire with 1,5mm² enables a powerful spark under every condition. It is suitable for retrofitting on every motor and offers the following advantages compared to a standard PVC cable: High voltage resistant up to over 50000V (50kV) Heat resistant up to 200 ° (fire protection class FT-1 / VW-1) Copper core [...]
bgm - Item number: 7673820G Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in cable branch ignition base plate -VESPA- Vespa PX old ( 7 cables) - interested in gray cable, also searched for: cable branch | Ignition stator | Cable branch | Cable branch | [...]
High quality new edition of the cable box for the classic Vespa PX models built up to 1984 and the Sprint Veloce models, both with battery. Not available from Piaggio for a long time, we had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. NOTE: Also available for PX models up to 1984 without [...]
Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]
Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]
High quality new edition of the cable box for the classic Vespa PX models up to 1984. Installed under the horn cascade. Not available from Piaggio for a long time, we have had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. bgm - Item number: 1163603 Availability: in stock (Please check the availability here in the Scooter [...]
High quality new edition of the cable boxes for the classic Vespa PX. Here in a special version for the PX models not launched in Germany until 1984 WITHOUT a battery. The wiring harness of these vehicles already has a round connector on the ignition side, like the later PX Lusso models. Therefore this box is higher than that of the German [...]
Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]
High quality new edition of the cable box for the classic smallframe Vespa. Not available from Piaggio for a long time, we had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. The only deviations from the original are the Phillips screws included in the scope of delivery (instead of slotted screws). bgm - item number: 9010024N Availability: in stock (Please check [...]
Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]
bgm - Item number: 7673822 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Ignition> Cables Other customers who are interested in ignition cables -UNIVERSAL Ø = 7mm- 100cm - Schwarz are also interested in: Ignition cables | Ignition cable | Spark plug wire | Cable | Ignition | Cable | Cable [...]
