The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]
The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]
The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]
Intake manifold -BGM PRO V2- Peugeot 50ccm (vertical cylinder) - CS = 23mm. Open BGM PRO intake manifold with which you can drive Arreche carburettors up to 21 mm, PHVA / PHBN carburettors up to 21 mm and the complete PHBG carburetor series. The intake manifold is supplied complete with a membrane block and two pads. The rubber flange connection can be exchanged separately. Powerful membrane suction kit for the right [...]
bgm - Item number: BGM2586 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,11 kg Category: Engine> Carburettor> Spacer Other customers who are looking for intake manifold spacers -BGM PRO Malossi / Polini-Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - 10mm are interested, also looked for: Intake manifold spacer | Spacer [...]
bgm - Item number: BGM2585 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Carburettor> Spacer Other customers who are looking for intake manifold spacers -BGM PRO Malossi / Polini-Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - 6mm are interested, also looked for: Intake manifold spacer | Spacer [...]
Connecting rubbers carburetor
BGM14040 connecting rubber carburettor / intake manifold -BGM PRO- AW = 40 / 40mm
The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 34 / 34mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]
Connecting rubbers carburetor
BGM13540 connecting rubber carburettor / intake manifold -BGM PRO- AW = 35 / 40mm
The connecting rubbers from BGM from the carburettor to the intake manifold with a connection size of Ø = 35 / 40mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. This conversion link allows [...]
Connecting rubbers carburetor
BGM13535 connecting rubber carburettor / intake manifold -BGM PRO- AW = 35 / 35mm
The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 35 / 35mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]
Connecting rubbers carburetor
BGM13030 connecting rubber carburettor / intake manifold -BGM PRO- AW = 30 / 30mm
The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 30 / 30mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]
Open intake manifold for all Piaggio scooters with 2-stroke engine housing (50cc, 125cc, 180cc). The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher top speed! Due to the changed installation position of the carburetor, the original connection hose to the air filter box can no longer be used. With a Ø30mm connection width, [...]
Intake manifold -BGM PRO Evolution- Piaggio - CS = 23mm. Open intake manifold for all Piaggio scooters with the 50 cc engine housing. The ideal connection between the Dellorto, Gurtner and Arreche carburetors with 23 mm connection width. The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher [...]
