Fahrzeugelektrik
The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets. Regulated direct current output for the horn (12V DC) 12V USB charging output with up to 3A charging power 12V flasher relay [...]
Fahrzeugelektrik
BGM6710KT2 Horn rectifier incl. Connector -BGM PRO- with LED flasher relay and USB charging function
The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets. Regulated direct current output for the horn (12V DC) 12V USB charging output with up to 3A charging power 12V flasher relay [...]
Voltage Regulators
BGM6696 voltage regulator -4-pin BGM PRO 6V AC / DC- universal
Compact voltage regulator for all alternators with 6 volt on-board voltage. The power supply of older vehicles with 6V voltage is often designed as a so-called self-regulating system. Only the resistance of the bulbs prevents overvoltage and thus the lamps from burning out. Such a simple electrical system unfortunately always harbors the risk that a defective pear will also cause all [...]
Voltage Regulators
BGM6698 Voltage regulator -BGM PRO 12V DC Wassell / PODtronic- universal
This is the right controller to convert the vehicle electrical system completely to direct current (= DC). A corresponding ignition base plate such as the BGM8040 is also required. When converting to DC, a battery must be connected to the wiring harness. The connection of the controller is very simple: yellow from controller to yellow from the ignition base plate - 2x black ground [...]
Our three-pole electronic flasher relay is ideal as a replacement for a conventional flasher relay. Most manufacturers use an inexpensive mechanical relay ex works, this clocking always only depends on the attached load, i.e. on the wattage of the indicator bulbs used. If this is changed significantly, e.g. through the use of LED technology, a [...]
Suitable for a load of 1,2 to max. 10 watts. Therefore ideal for LED indicators. Therefore not suitable for handlebar end indicators with festoons with more than 10 watts. Please use C7145 or 1010030 here (see 'alternatives'). bgm - item number: BGM6202 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame