Crankshaft dismantling and insertion tool set Vespa Largeframe -BGM PRO- Made in Germany Press the crankshaft out of its bearing seat quickly and easily like a professional and pull it back in again. This is possible with the quality tool from BGM PRO. With this set, the crankshaft can be pushed out of its press fit in the bearing of the engine housing in a professional and material-friendly manner and also [...]
BGM pro special tool for the end shield of the rear wheel bearing of all Vespa Wideframe models. Thanks to its clever construction, this tool can be used for both hole stitch sizes (Ø37 + 43mm). It offers the possibility of pre-tensioning the tool on the nut to be loosened. Due to the identical thread pitch of the tool and nut, the preload is fully retained during loosening, preventing slipping.
Tool for crankshaft assembly Vespa Largeframe -BGM PRO- Made in Germany Assemble the crankshaft quickly and easily like a professional. This is possible with the quality tool from BGM PRO. With this set, the crankshaft can be drawn into its press fit in the bearing of the engine housing in a professional and material-friendly manner. Push the crankshaft as far as possible into the bearing seat (with [...]
bgm - Item number: BGM7995TL Availability: not in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Tools> Tools Other customers who are interested in crankshaft pull-in tool in alternator half -BGM PRO M11 / M12x1,5- Vespa Wideframe / Largeframe V98, V1-V15, V30-V33, VU, VN, VM, VL, VB, VBA, VNA, VBB, VNB, GS150 [...]
The main shaft of the GS 160 and SS 180 is held by such a castle nut. Wedi seat 40mm. bgm - Item number: BGM5440 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are interested in castle nut rear wheel bearing- BGM Original -VESPA Øi = 40mm, [...]
bgm - Item number: BGM4940 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Nuts Other customers who are looking for castle nut rear wheel bearing- BGM original- VESPA Øi = 40mm, Øa = 49mm, teeth = 9- Vespa Super 125 (VNC1T), Super 150 (VNB1T -153261), for front wheel bearings Vespa GS160 (VSB1T, VSB2T), SS180 [...]
Castle nut for: Rear wheel bearings: Vespa 125 - VNA, VNB, GT125 (up to 78300), GTR125 (up to 124013) Vespa 150 - VBA, VBB, VGLA, VGLB, GL150, Sprint (up to No. 1170239), Sprint Veloce (up to No. 169300) Front wheel bearing: Vespa 160GS, 180SS Ø outside: 49mm Ø inside (shaft seal seat): 37mm slots: 9pcs. Height: 12,5mm Suitable tool - article no. 1800018 bgm - Item number: BGM4937 [...]
