Carburetor components
7673423 Mixture adjustment idle screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor-
bgm - Item number: 7673423 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electrics> Carburettor components Other customers who are interested in mixture adjustment idle gas screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor interested, also looked for: Mixture adjustment | Idle screws | Set | Screw | Adjusting screw | [...]
Carburetor components
7673420 Mixture adjustment- idle screw set -DellOrto PHVA carburetor- Piaggio 50 cc 2-stroke
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHVA series is mainly used on vehicles with a Piaggio engine bgm - item number: 7673420 Availability: in stock (Please check [...]
Carburetor components
7673418 Mixture adjustment, idle screw set -BGM ORIGINAL M4 for BGM KWP carburettor (24mm - 26mm)
Adjustment screw set, suitable for the derivatives of the Keihin PWK carburetors with small body (24mm - 26mm - 28mm - 30mm) from Stage6, Motoforce, Koso, OKO, etc. Contains both the air screw and the idle screw. Incl. the springs and O-rings / seals behind it. Attention: The idle screw of this set has an M4 thread, therefore not suitable for original [...]
Carburetor components
7673422 Mixture adjustment- idle screw set -DellOrto PHBN carburetor- Minarelli 50 ccm electrochoke)
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHBN series is mainly used on vehicles with Minarelli engines bgm - item number: 7673422 Availability: in stock (Please check [...]
Carburetor components
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburetors with manual choke control. The PHBN series is mainly used on vehicles with a Minarelli engine bgm - item number: 7673421 Availability: in stock (Please check availability here [...]
