Carburetor nozzles
BGM857KT auxiliary jet set -BGM PRO- Dellorto (type: 9892) SI - (58-60-62-65-68 / 160)
The auxiliary nozzle of the SI carburetor does not have the simple function of a conventional nozzle, ie the pure regulation of the amount of fuel. With the introduction of the PX in 1977, the previously used SI carburettor type and its auxiliary nozzles were modified. The old carburetor types, such as those still used in the rally engines, had a separate air duct for the auxiliary nozzles. [...]
Carburetor nozzles
Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]
Carburetor nozzles
Idle jet set -BGM PRO Dellorto 4mm- (30-52) - (30-32-35-38-40-42-45-48-50-52) bgm - item number: 7671256 Availability: in stock (Please check availability here in Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburettor nozzles Other customers who wanted auxiliary jet set -BGM PRO for Dellorto (type: 11600) 4mm- (30-52) (30-32- 35-38-40-42-45-48-50-52), also looked for: auxiliary jet set [...]
Carburetor nozzles
Auxiliary jet set -BGM PRO Mikuni TM- (15,0 - 37,5) - (15-17.5-20-22.5-25-27.5-30-32.5-35-37.5) bgm - item number: 2599130 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Carburetor> Carburetor nozzles Other customers who are interested in auxiliary nozzle set -BGM PRO for Mikuni (type: VM22 / 210) TM / TMX - (15 -0-37-5) - [...]
Carburetor nozzles
Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]
Auxiliary jet set -BGM PRO Dellorto PHBG- MA- (30-50) bgm - item number: 7671257 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor- Nozzles Other customers who were interested in auxiliary nozzle set -BGM PRO for Dellorto (type: 1488) PHBG- MA- (30-50) also looked for: auxiliary nozzle set | [...]
Carburetor components
7673423 Mixture adjustment idle screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor-
bgm - Item number: 7673423 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electrics> Carburettor components Other customers who are interested in mixture adjustment idle gas screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor interested, also looked for: Mixture adjustment | Idle screws | Set | Screw | Adjusting screw | [...]
Carburetor components
7673420 Mixture adjustment- idle screw set -DellOrto PHVA carburetor- Piaggio 50 cc 2-stroke
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHVA series is mainly used on vehicles with a Piaggio engine bgm - item number: 7673420 Availability: in stock (Please check [...]
Carburetor components
7673418 Mixture adjustment, idle screw set -BGM ORIGINAL M4 for BGM KWP carburettor (24mm - 26mm)
Adjustment screw set, suitable for the derivatives of the Keihin PWK carburetors with small body (24mm - 26mm - 28mm - 30mm) from Stage6, Motoforce, Koso, OKO, etc. Contains both the air screw and the idle screw. Incl. the springs and O-rings / seals behind it. Attention: The idle screw of this set has an M4 thread, therefore not suitable for original [...]
Carburetor components
7673422 Mixture adjustment- idle screw set -DellOrto PHBN carburetor- Minarelli 50 ccm electrochoke)
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHBN series is mainly used on vehicles with Minarelli engines bgm - item number: 7673422 Availability: in stock (Please check [...]
Carburetor components
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburetors with manual choke control. The PHBN series is mainly used on vehicles with a Minarelli engine bgm - item number: 7673421 Availability: in stock (Please check availability here [...]
