Steering tube BGM PRO Vespa PK XL2 - modified for use on Vespa Largeframe (around 1961-1979) e.g. Super 125/150, Sprint150, Rally180 / 200, GT / GTR125, TS125 Motovespa DS200, Sprint / GS150 (04C), GT160 (09C ) PROBLEMS OF THE OLD ORIGINAL FORKS The forks of the old Vespa largeframe models have antiquated damping and suspension kinematics. Due to the design, the chassis hits quickly when braking hard ('goes [...]
Shock absorber mountings
If a PK fork is equipped with a disc brake, the shock absorber mount is offset. This is due to the fact that the disc brake was originally only designed for the PX models. This adapter plate also moves it outwards at the top so that the damper is straight again. At the same time it is lowered by 5mm which is a [...]
Fork springs for all Lambrettas of the Li family (Li, LiS, TV, GT, SX, DL, GP). The springs are 10% harder than the original Lambretta fork springs and are made for us in Germany. The springs are block-stable and shot-peened. Since the wire surface is most heavily loaded with springs, shot peening is more important for dynamically highly loaded [...]
BGM original swing arm bearing set for revision of the bearing between fork and swing arm The connection between the steering tube and the front wheel swing arm is a highly stressed component on the Vespa models. Forces from all directions must be safely absorbed and transferred. The swing arm mounting is responsible for precise wheel guidance and transmits the steering impulse. Thus also a TÜV-relevant component. Camps [...]
BGM PRO silent rubbers made of polyurethane. Significantly tighter than the original rubbers, they reduce natural movement to a minimum. The damping works in a defined and precise manner. This makes the vehicle appear much tighter and the dampers respond more quickly. The set contains the two rubbers for the shock absorber on the front axle. The rubbers sit on the shock absorber and are each [...]
Shock absorber mountings
bgm - Item number: BGM7707A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Shock absorbers> Shock absorber mountings Other customers who are looking for spring plates for shock absorber springs in front, top fork / swing arm -BGM PRO- Largeframe Sprint (VLB1T), Rally (VSD / VSE), GT / GTR125 (VNL2T), Super (VNC / VBC), TS125 (VNL3T), VNA, VNB, VBA, VBB, [...]
