Ball bearings and Wedi sets
BGM1122 Bearing set - Shaft seal set for crankshaft -BGM ORIGINAL FKM- Lambretta DL, GP
Complete kit to re-store the crank mechanism. Absolutely recommended as a replacement measure or when installing a new crankshaft. The kit contains: 6305 FAG bearings for the drive side NU2205 bearings for the generator side * Drive-side Viton shaft seal from MB Developments Inner Viton shaft seal from MB Developments for the Maghousing Outer Maghousing shaft seal 6305 Seal Four Allen screws for [...]
Ball bearings and Wedi sets
BGM Pro Spezial crankshaft bearings with narrow shoulder width for Vespa Wideframe engines These bearings should be used if the high-quality Corteco shaft sealing rings are to be installed at the same time. The Corteco shaft seals have a greater material thickness than the previously common shaft seal carriers (0.8mm instead of 0.5mm sheet metal thickness). The narrower bearing shoulders of the BGM PRO bearings compensate for the thicker sheet metal [...]
A complete revision set for the control cables as well as all classic Vesps, that should not be missing in any glove compartment! For the first time we can offer the otherwise very expensive individual parts as a cost-effective complete set. The whole thing in a fantastic quality. Made by a supplier for the Japanese motorcycle industry, the details of the set are impressive. The clamping screws for the [...]
Carburetor components
7673423 Mixture adjustment idle screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor-
bgm - Item number: 7673423 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electrics> Carburettor components Other customers who are interested in mixture adjustment idle gas screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor interested, also looked for: Mixture adjustment | Idle screws | Set | Screw | Adjusting screw | [...]
Carburetor components
7673420 Mixture adjustment- idle screw set -DellOrto PHVA carburetor- Piaggio 50 cc 2-stroke
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHVA series is mainly used on vehicles with a Piaggio engine bgm - item number: 7673420 Availability: in stock (Please check [...]
Carburetor components
7673418 Mixture adjustment, idle screw set -BGM ORIGINAL M4 for BGM KWP carburettor (24mm - 26mm)
Adjustment screw set, suitable for the derivatives of the Keihin PWK carburetors with small body (24mm - 26mm - 28mm - 30mm) from Stage6, Motoforce, Koso, OKO, etc. Contains both the air screw and the idle screw. Incl. the springs and O-rings / seals behind it. Attention: The idle screw of this set has an M4 thread, therefore not suitable for original [...]
Carburetor components
7673422 Mixture adjustment- idle screw set -DellOrto PHBN carburetor- Minarelli 50 ccm electrochoke)
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHBN series is mainly used on vehicles with Minarelli engines bgm - item number: 7673422 Availability: in stock (Please check [...]
Carburetor components
Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburetors with manual choke control. The PHBN series is mainly used on vehicles with a Minarelli engine bgm - item number: 7673421 Availability: in stock (Please check availability here [...]
