Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).
Since the first PX models have now achieved the status of a real classic car, but there have not been any good (if at all) reproductions of the cable harness for the first P and PX series up to 1984, we have this new in a very good quality let hang up. Vehicles from the [...]
A wire harness is a consumable part. After many years in heat, cold, gasoline fumes, vibrations and moisture, even the best copper cable will deteriorate. Externally, mostly well camouflaged by apparently intact insulation, the so-called inner strand is already corroded and brittle. A weak light, misfires, all of that is a thing of the past with one of our new high-quality cable harnesses. In order to [...]
Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).
Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]
Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]
Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]
Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]
Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]
Cable branch for the handlebars of the Vespa PX models up to 1984. These can be recognized by the ignition lock in the handlebar cover. Supplement to the vehicle wiring harness. Can be used for all German models with batteries, electronic ignition and eight connections on the ignition lock (the Italian version only has four connections here). bgm - Item number: SC5005HB Availability: in stock (Please check availability here [...]
BGM Pro cable branch to supplement the BGM Pro conversion wiring harness for use with a Vespatronic ignition. PROBLEM The cable colors of the Vespatronic ignition differ greatly from the conventional color scheme of a Piaggio cable harness for electronic ignitions (which is also continued in the BGM Pro conversion cable harness). Piaggio / BGM use green (engine off), blue (luminous flux), black (ground). SOLUTION The BGM Pro cable branch [...]
Cable branch for the handlebars of the Vespa PX models up to 1984 in Italian design, without battery. These can be recognized by the ignition lock with a white plastic housing in the handlebar cover. Supplement to the vehicle wiring harness. Can be used for all models without a battery and four connections on the ignition lock (the German version with a battery has eight connections). bgm - Item number: SC5006HB Availability: in stock [...]
